Thanks, people! I got two responses for the above cable guide. Should be good.
|
After waiting more than a month for a new crown race and bottom cup for my mercier 300 to fix my either too lose or binding headset woes it appears the upper cups are the problem.
ISO: french threaded headset, excellent mechanical condition. Stack height of 35mm, plus or minus a mm. Currently there is a stronglight p3 on there. |
Downtube shifter mounts on their way to stykthyn
|
I'm looking for two purple anodized water bottle cages. Can't believe these aren't commonly available any more! Does anyone have a couple kicking around?
|
Originally Posted by eeuuugh
(Post 21499100)
I'm looking for two purple anodized water bottle cages. Can't believe these aren't commonly available any more! Does anyone have a couple kicking around?
https://cimg9.ibsrv.net/gimg/bikefor...a705122521.jpg |
Originally Posted by malcala622
(Post 21499146)
There might be a shop near my called Pats605 Cyclery that has these in stock. I can check tomorrow if you like. 9.99 a piece.
|
Peugeot Blue & Yellow Frame On OfferUp
Originally Posted by malcala622
(Post 21496066)
verktyg I know its not your size but just for kicks thought I'd post it. Check out this Peugeot PLX 10 1955-58 Reynolds for $1200 on OfferUp https://offerup.co/lAgJ4xCqM6
https://cimg2.ibsrv.net/gimg/bikefor...3b5108ce62.jpg It's awfully "spendy". I'm looking for a complete bike because piecing together all the vintage parts can more than double the cost. I've seen whole bikes like this for only a little more $$$$. It just a Peugeot! :innocent: Who ever said that C&Vers aren't cheap! verktyg :50: |
Looking for a 24.0 seatpost for a Peugeot HLE frame. I'm trying to get a budget build together, so condition is not an issue so long as the post is usable.
|
Looking for a French threaded fork w/ 140mm steerer to fit Motobecane Mirage. Not sure what year it was manufactured.
|
Originally Posted by oneclick
(Post 21469272)
I *know* I have these - I'll send you a pm.
|
Originally Posted by eeuuugh
(Post 21499267)
That would be great, thank you!
Anyway, they're off the package cardboard, but unused. PM me if interested. https://cimg1.ibsrv.net/gimg/bikefor...8776dea210.jpg |
Originally Posted by popefelix
(Post 21500131)
Looking for a French threaded fork w/ 140mm steerer to fit Motobecane Mirage. Not sure what year it was manufactured.
|
@eeuuugh I'd jump on those cages from vintage cyclist. It'll be a few hours before I can check for you.
Ride safe Update: No dice on the cages from Pats605. They have limited stock these days. |
5 Complete Links of Regina Chain Wanted. Found! Thanks to Mad Honk.
Yep, just 5 links to extend a chain that is too short for my Olmo project. The chain I have is the black "Super Corsa," marked "Regina SC," but I would be happy with any older Non-oro Regina chain. I have a multitude of small trade items of similar vintage to the chain I seek; Campy crank bolts, dropout adjuster screws, cable clips, chainring bolts, Regina cogs, etc. Brent |
Putting these ISOs out for a friend and also so I can finish up some pending projects:
Got something? Send me a PM. -Kurt |
74BCD
Seeking a 38/39/40 tooth chainwheel (also seeking a 24/26 tooth chainwheel same BCD Will pay for chainwheel(s) and the shipping as I live in Canada and prohibitive with shipping to trade |
Originally Posted by WGB
(Post 21504923)
74BCD
Seeking a 38/39/40 tooth chainwheel (also seeking a 24/26 tooth chainwheel same BCD Will pay for chainwheel(s) and the shipping as I live in Canada and prohibitive with shipping to trade |
Originally Posted by WGB
(Post 21504923)
74BCD
Seeking a 38/39/40 tooth chainwheel (also seeking a 24/26 tooth chainwheel same BCD Will pay for chainwheel(s) and the shipping as I live in Canada and prohibitive with shipping to trade What I'd REALLY LIKE (is everyone listening?) is a left side 170mm Triomphe crank. Send me your postal address. You can have the ring. I get karma. Get me a crank and you get karma too. |
oneclick
Pm sent for the 24 tooth., Thank you!! Iowegian I have an SR Apex small bolt circle crankset that is 50/44/30 rings and with a 74 BCD. I can put the 44 on the outside and the 30 on the inside with the 24 on the inner which will be 44/30/24. It may not look like much but since I usually ride my doubles on the small tooth (usually 39 tooth) except on downhills, I can't see having a large chainwheel, especially with a heavy load. I'd prefer a 38/39/40 tooth large ring instead of the 44 tooth but a 44 is still slightly better than a 48, especially for shifting. Still, I'll keep looking for a 38/39/40 tooth. |
Wow, SR Apex also came in an all-74 BCD configuration? Who knew?
I have the 86 BCD triple version, and it’s great. Have seen the larger BCD version, but never one that was all 74. Could you post a few pics? |
Originally Posted by rccardr
(Post 21505999)
wow, sr apex also came in an all-74 bcd configuration? Who knew?
I have the 86 bcd triple version, and it’s great. Have seen the larger bcd version, but never one that was all 74. Could you post a few pics? |
rccardr rhm
My caliper batteries are dead but was able to get a reading. Couldn't hit the zeroing button as the battery died when I laid it down. Was measured for me at Co-op and told it was 74. Now wondering if 76? Please advise if I measured wrong. https://cimg6.ibsrv.net/gimg/bikefor...d421636bad.jpg https://cimg8.ibsrv.net/gimg/bikefor...0da6ddbe52.jpg https://cimg0.ibsrv.net/gimg/bikefor...834ec8f35a.jpg |
Sheldon say only 74, no 76. You're good.
Wait a sec, that's not BCD you're measuring. You're measuring the diagonal of a pentagon. If it *is* 74mm, you've got a bolt circle diameter of 2x 38.904, or just under 78mm. That makes no sense either. Measure one-hole-to-the-next, and use his chart: https://www.sheldonbrown.com/cribsheet-bcd.html It may be that the ring I sent you will not fit; oh well. |
Scratch that, won't work with the brake stiffener I'm using.
https://cimg6.ibsrv.net/gimg/bikefor...002096b4c9.jpg -Kurt |
I’ma gonna guessa thatsa 86 bcd cranka setta.
|
All times are GMT -6. The time now is 03:42 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.