Reversed Chop & Flop Handlebar
2 Attachment(s)
I recently converted an old road bike to a single cog. I wanted to change up the handlebars to something that was a little more upright.
This exact style is on the rear handlebar set of our Burley Softride tandem that we acquired many years ago. I don't know if they came this way from Burley or the previous owner set them up like that. They have worked out great, very comfortable for multiple hand positions and enables a more upright riding position. Brake lever is an old Nashbar aero, works great and puts the lever in a perfect position for the left hand. |
This has to be a troll.
|
Originally Posted by prooftheory
(Post 19678835)
This has to be a troll.
Been riding since the early 70's, worked in a shop for several years. I've had this PX-10 since '77, it's an early 70's model that I purchased in perfect condition used at a local shop. Dude who owned it never learned to ride it. I have put thousands of miles on the pictured bike in 10 speed form, including a tour around Lake Michigan in 1978. Phil Wood hubs and bottom bracket since '78, I personally built these wheels with Mavic Module 3 27" rims. Still true almost 4 decades later. Just converted this to a single cog, I've got a 2 speed SRAM Automatix being built for it now. Plan to use this for a single city bike instead of the tandem my wife and I normally ride. |
pretty much any cruiser style handlebar would be more upright.
|
Those are bullhorns on backwards, and upside down. I am shaking my head right now.
|
Originally Posted by pcf
(Post 19678913)
Nope.
Been riding since the early 70's, worked in a shop for several years. |
Dumb handlebars aside, I'm digging that bike.
|
1 Attachment(s)
Sorry guys, but have any of you tried riding with a handlebar setup like this?
It works pretty well. Compact and it puts the bend into just the right position for your hands. Clean and minimal. |
Not much different than the VO Belleville bar, except for the curved end. And that curve looks ergonomically logical. I bet it's super comfortable on the palms and wrists.
http://store.velo-orange.com/media/c.../_/3_4_1_5.jpg |
Originally Posted by pcf
(Post 19679920)
Sorry guys, but have any of you tried riding with a handlebar setup like this?
It works pretty well. Compact and it puts the bend into just the right position for your hands. Clean and minimal. I'm old enough to appreciate that kind of bar setup. (my neck and shoulders are not as flexible anymore) I prefer my bars level with my seat, always have had flat bars, this would be easy enough to experiment with. |
2 Attachment(s)
Originally Posted by SquidPuppet
(Post 19680135)
And that curve looks ergonomically logical. I bet it's super comfortable on the palms and wrists.
As I get older, it is nice to err on the side of a comfortable, upright riding position that these bars offer. |
Originally Posted by Scrodzilla
(Post 19679695)
That just means you should know better than to have a dumb handlebar setup like that.
|
Sure it looks weird, but if your not hitting your knees or creating a hazard of some kind, who cares.
That said, I have no experience with this kind of setup, so I wouldn't know unless I tried it for myself. |
Originally Posted by TenSpeedV2
(Post 19680423)
Completely agree with this.
And thanks, SHBR, you have brought up a good point. There is no knee interference, even when out of the saddle on a hill climb. In fact, the bars put your body in a powerful position for out of saddle riding. |
Originally Posted by pcf
(Post 19680459)
You guys might look at this differently if you still ride when you are nearly 60 years old.
And thanks, SHBR, you have brought up a good point. There is no knee interference, even when out of the saddle on a hill climb. In fact, the bars put your body in a powerful position for out of saddle riding. |
Let's celebrate handlebar diversity!
|
Originally Posted by TenSpeedV2
(Post 19680540)
but I won't be riding JA bars like those that you posted.
|
If your Burley came like that, the handlebars had been flipped. The bullhorn style is common on roadie tandems.
Still, I see no issue with experimentation. http://www.sandsmachine.com/p_bur_t6.jpg |
Originally Posted by SquidPuppet
(Post 19680615)
Dude. A little harsh, no?
|
Originally Posted by pcf
(Post 19680549)
Let's celebrate handlebar diversity!
|
These don't strike me as appreciably different from some of the bars you see on some of the older bikes on L'Eroica rides.
http://patitucciphoto.com/wp-content...9TRit0028e.jpg What is "normal" is all a matter of perspective. |
|
Originally Posted by ecnewell
(Post 19680695)
These don't strike me as appreciably different from some of the bars you see on some of the older bikes on L'Eroica rides.
http://patitucciphoto.com/wp-content...9TRit0028e.jpg What is "normal" is all a matter of perspective. I can say from experience that the arcing high spot in front of the grips, the 'hump', offers a very comfortable additional hand position. It also acts as a great 'hook' to pull on when climbing or acceleration when out of the saddle. That's why I wrap my bars even though it's totally unconventional. https://www.pedalroom.com/p/the-roya...n-22098_32.jpg |
|
|
All times are GMT -6. The time now is 03:10 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.