Truck bike rack
Hello, recently purchased a beautiful Specialized hybrid. I’m currently transporting it to riding trails in the bed of my pick up. You can definitely call it a bed because to protect it I lay more blankets for it than I have on my bed! With so many to choose from any suggestions for a truck bike rack that you’ve used?
|
Buy this.
https://www.ebay.com/i/321823289498?chn=ps&dispItem=1 Buy a 2x6. Almost all truck beds have grooves or other ways to keep a 2x6 in place. Screw the fork mount to the 2X and you are done. |
What kind of truck? I have a Chevy Silverado and use a board with a fork mount in the bed indents. Cheap and works great.
|
Originally Posted by benetga
(Post 20256382)
What kind of truck? I have a Chevy Silverado and use a board with a fork mount in the bed indents. Cheap and works great.
|
1 Attachment(s)
KUAT Transfer 2...very happy with this bike rack. $289.00 shipped.
|
Originally Posted by Tacorock
(Post 20256468)
I have ‘03 Toyota Tundra. The fork mounts seem very secure, no long term issues with the bike tire on and off for mounting or fork issues? Yes there are 2x6 groves. Y’all prefer that over a rack that holds the tire?
|
I had a rack that held the tires (homemade from PVC, with pipe insulation for padding and to hold the front wheel more securely.) If you have quick release tires, I'd go with the fork mount - especially if you are carrying multiple bikes. In the time you tie off the bikes to keep them from flopping around, lock them with a chain, etc., you can easily remove the tire and lock the bike in place.
But you should also consider a good hitch-mounted rack. |
I just lay the bike down flat on the non drive side. The bed may pick up a scratch or 2 here and there, -- but its a truck
Alternately, i also use cam buckle tie downs, (motorcycle tie downs) - and transport them upright when i am transporting multiple bikes or need spac e for other gear back there--- dont use the ratchet straps, they are overkill for a bicycle. If your truck has been built anytime within the last decade or 2 you likely already have tie down attachment points in your bed |
Scratches in your truck bed add character.
|
Originally Posted by Tacorock
(Post 20256468)
I have ‘03 Toyota Tundra. The fork mounts seem very secure, no long term issues with the bike tire on and off for mounting or fork issues? Yes there are 2x6 groves. Y’all prefer that over a rack that holds the tire?
|
Top Line model UG2500. Holds bike upright and tight. No disassembly required. Got mine for Christmas last and love it.
BTW I drive an F150 with 8' bed. No problems with the bike rolling around with the Top Line rack. Jon |
This picture isn't me but I strap my bikes (and motorcycles) down the same way. Put two soft ties on the bars and strap them down with two friction straps. Takes about 30 seconds. I've driven from NJ to El Paso with a bike in the truck with no issues.
https://d5vl3wtxb1n77.cloudfront.net..._truck-min.png You need this for $8 https://www.cyclegear.com/accessorie...own-extensions And this for $18 https://www.cyclegear.com/accessorie...uckle-tie-down |
Decided
Well I decided on the Sunlite fork mount bike block on a 2x4. $14.00 and I already have the wood. Thanks for the suggestions, time and use will tell.
|
Fork mount on the back of my toolbox, just enough room to clear the tailgate on my ‘05 Dakota. Works as well or better than the Yakima on the wife’s Sportage.
|
All times are GMT -6. The time now is 02:46 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.