WTB 120mm rear campy skewer
anyone have one to sell me?
|
What style or era are you looking for? Thanks, MH
|
for a 70's campy record high flange hub. it's a 116mm but a 120mm will be fine, blade can be flat, curved, no need to be correct or perfect.
|
Crab,
I have one here that I got from Alex Ries, That should be period correct. Flat lever, and straight tapper adjuster screw. I have not gotten to doing a refurbish on it. Normally I would tear it completely apart, and use a brass brush on a Dremel at low speeds to clean off any rust and residue and then clear coat to prevent any more damage to the chrome. And then re-assemble with light Campy grease. It will need a good cleaning or refurbishing. PM me Smiles, MH https://cimg3.ibsrv.net/gimg/bikefor...823160928c.jpg |
Originally Posted by Mad Honk
(Post 21825810)
Crab,
I have one here that I got from Alex Ries, That should be period correct. Flat lever, and straight tapper adjuster screw. I have not gotten to doing a refurbish on it. Normally I would tear it completely apart, and use a brass brush on a Dremel at low speeds to clean off any rust and residue and then clear coat to prevent any more damage to the chrome. And then re-assemble with light Campy grease. It will need a good cleaning or refurbishing. PM me Smiles, MH https://cimg3.ibsrv.net/gimg/bikefor...823160928c.jpg |
Not even from a 40 year plus mechanic that does this stuff in his shop on a regular basis? Har, Har, Har! ( I need to learn Pirate speak. ) Smiles, MH
|
Originally Posted by Mad Honk
(Post 21825899)
Not even from a 40 year plus mechanic that does this stuff in his shop on a regular basis? Har, Har, Har! ( I need to learn Pirate speak. ) Smiles, MH
|
thanks to Santa Mad Honk for coming through with!
|
All times are GMT -6. The time now is 05:23 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.