Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Classic and Vintage Bicycles: Whats it Worth? Appraisals. (https://www.bikeforums.net/forumdisplay.php?f=273)
-   -   Frame value: MERCKX repaint (https://www.bikeforums.net/showthread.php?t=1221555)

billytwosheds 01-14-21 11:41 AM

Frame value: MERCKX repaint
 
Seller thinks it's a repaint, which makes sense. Still looks chromed under the paint.

What's the ballpark for a Merckx frame like this?

https://cimg4.ibsrv.net/gimg/bikefor...4f642355f5.jpg

jiangshi 01-14-21 12:01 PM

Serial number? Same # on fork?

Without knowing the model, there's no way to know the value.

billytwosheds 01-14-21 12:10 PM


Originally Posted by jiangshi (Post 21877814)
Serial number? Same # on fork?

Without knowing the model, there's no way to know the value.

Seller-provided info: Serial number: C3722. / LB 6 TT

Italian threading, fork is a match to frame but seller suggests mating them will require a short stack headset.

More pics:

https://cimg8.ibsrv.net/gimg/bikefor...61ffd2d072.jpg
https://cimg7.ibsrv.net/gimg/bikefor...d8b9c929c4.jpg
https://cimg0.ibsrv.net/gimg/bikefor...96ff4a1cdf.jpg
https://cimg1.ibsrv.net/gimg/bikefor...c837bb40e9.jpg

jiangshi 01-14-21 01:54 PM

I'd guess a Corsa, but there is actually an expert here, perhaps he'll chime in.

It looks decent from 6', not as good close up, IMO. It was repainted for a reason, and that reason pops out in a few places.

If you just wanted to try out a maybe worn out Merckx because you've never had one, and it fits, $300-$400 if the fork is good. I would really want to inspect everything closely. Measure the fork and make sure it will fit at least a newer Record headset.

I would pass, personally.

I would rather pay more for a better repaint for a keeper. Repaints don't bother me, if done halfway decently. I'm not a collector, but like to have a nice looking bike when I ride.

rjhammett 01-14-21 02:38 PM

I purchased a Corsa Extra frame on this site last fall with original paint and in good condition. The price was on the low end of the estimate above. It was a 61cm frame and came with headset, seatpost and saddle.

billytwosheds 01-14-21 04:02 PM

Great, thanks for the feedback rjhammett jiangshi.

Asking price is $450 and yes, it does look like a fairly worn out Merckx. I'll probably pass for now.

billytwosheds 01-15-21 03:54 PM

FWIW I found useful decoding information for the Merckx here:

https://www.bikeforums.net/classic-v...kx-frames.html

and here: https://www.millfieldvelo.com.au/dat...-steel-frames/

According to this, the serial is LB 6 TT / C3722.

LB = employee
6 = 56cm
TT = TSX
C= 1990-91
3722 = production number out of 9999

Does that sound about right?

thinktubes 01-16-21 09:00 AM

CyclesMakaron

jet sanchEz 01-16-21 11:46 AM

I'd pass too but, if you absolutely must have a Merckx and this is your size, then $200 tops, that paint is garish and poorly done

CyclesMakaron 01-19-21 01:45 PM

C3722 L6TTB = Eddy Merckx Century TSX 1990

malcala622 01-23-21 09:20 PM

If this is pacific coast cyles on ebay i know the seller personally. I don't see the value in his asking price especially since it's a poor repaint.


All times are GMT -6. The time now is 07:38 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.