My modernized Crosscut
Her she is . I’m finished except for the pedals . I may take it to a local bike shop and pay them to remove them for me .
https://cimg5.ibsrv.net/gimg/bikefor...d7d909b80.jpeg |
I really like the older hybrids like this. What all did you do to it?
|
Originally Posted by AlmostTrick
(Post 21308994)
I really like the older hybrids like this. What all did you do to it?
About all that’s original is the frame with bottom bracket with cranks and the seatpost. The pedals are original and are stuck pretty good . I hope to swap them out for some lightweight platforms . Rides great . Shifts like butter . I’ve done a lot of similar work on my early 90’s Schwinn Crisscross except it has old wheels . I may spring for a new set of wheels for it next month . Although they ride straight and true . Both frames are Chrome Moly and the bikes are fairly light compared to everything else I own . I think around 27-28 lbs . Never weighed them , but that’s what I’ve read in the Schwinn Spec sheet . |
I like it. Looks great!
|
For your stuck pedals, spray them with some PB Blaster then give your pedal wrench a good whack with a wood mallet. I've been able to remove stubborn pedals in the past with this method.
|
just make sure you are trying to turn them the correct direction! :D
|
Originally Posted by rumrunn6
(Post 21313467)
just make sure you are trying to turn them the correct direction! :D
|
https://cimg7.ibsrv.net/gimg/bikefor...d69553065.jpeg
Swapped out my saddle for a Brooks B-67 this morning. It’s a little on the heavy side but was fairly comfortable riding today . May adjust the nose up a little to keep from sliding forward so easily before the next ride . |
Originally Posted by kirby999
(Post 21329244)
Swapped out my saddle for a Brooks B-67 this morning. It’s a little on the heavy side but was fairly comfortable riding today . May adjust the nose up a little to keep from sliding forward so easily before the next ride .
|
Originally Posted by Korina
(Post 21337224)
Did you ever get the pedals off? It doesn't look like it.
Haven’t tried. Been too wet or too cold . waiting for nice weather . |
Originally Posted by kirby999
(Post 21337368)
not yet ! LOL ,
Haven’t tried. Been too wet or too cold . waiting for nice weather . |
Originally Posted by Korina
(Post 21337447)
I'll send you some of our nice clear weather if you'll send us rain; it's alarmingly dry here. :)
|
Got a new B-67 for my CrossCut , one of the aged ones . Tried it out for 10.5 miles today . I think I’m going to like it. The black B-67 will be going on another bike .
https://cimg1.ibsrv.net/gimg/bikefor...13177d3f0.jpeg |
Upgraded my Crosscut today . Ever since I bought it ,over ten years ago , I’ve been trying to move the old beat up cage pedals from the cranks .
I’ve ruined more wrenches trying to get them off and neither side has moved a micro . I ruined a new $20 pedal wrench yesterday. So I got to thinking , why not change out the cranks ? Then I can put whatever pedals I want on it . I also have been toying with the idea of going to a 1x8 drivetrain and eliminate the front derailleur and shifter . I rarely shift out of the middle chainring anyway. Today , I borrowed a set of Shimano Hybrid cranks off another bike that had removable chainrings and installed them and a 36 tooth oval wide narrow chainring on the CrossCut . Installed a set of pedal extenders and a set of platform pedals . Then took her for a test ride . I’m in LOVE . With this setup , I get to use those middle gears that used to be at the top end spinning down hill to get the mo to get up the next hill . Riding around the the neighborhood , I got up to sixth gear and purposely approached a few hills slow so I could try out the new low gear . Wow! I just spin right on up the hills . I‘m going to ride the Crosscut for a week or so , but I’m thinking I may be I’m going to be going 1x8 on my CrissCross and 1x7 my Specialized Hardrock . https://cimg0.ibsrv.net/gimg/bikefor...02bc96630.jpeg |
Originally Posted by kirby999
(Post 21627142)
Upgraded my Crosscut today . Ever since I bought it ,over ten years ago , I’ve been trying to move the old beat up cage pedals from the cranks .
I’ve ruined more wrenched trying to get them off and neither side has moved a micro . I ruined a new $20 pedal wrench yesterday. So I got to thinking , why not change out the cranks ? Then I can put whatever pedals I want on it . I also have been toying with the idea of going to a 1x8 drivetrain and eliminate the front derailleur and shifter . I rarely shift out of the middle chainring anyway. Today , I borrowed a set of Shimano Hybrid cranks off another bike that had removable chainrings and installed them and a 36 tooth oval wide narrow chainring on the CrossCut . Installed a set of pedal extenders and a set of platform pedals . Then took her for a test ride . I’m in LOVE . With this setup , I get to use those middle gears that used to be at the top end spinning down hill to get the mo to get up the next hill . Riding around the the neighborhood , I got up to sixth gear and purposely approached a few hills slow so I could try out the new low gear . Wow! I just spin right on up the hills . I‘m going to ride the Crosscut for a week or so , but I’m thinking I may be I’m going to be going 1x8 on my CrissCross and 1x7 my Specialized Hardrock . https://cimg0.ibsrv.net/gimg/bikefor...02bc96630.jpeg If you keep the setup, be sure to shorten the chain for slicker shifting and better chain retention. Rear brake loop is too long; saddle is not level also. |
I liked my Crosscut as a 1X drivetrain, I decided to change my CrissCross to 1X.
We just had a rain shower , so it’ll be tomorrow before I can try it out properly. This one has a 11-34 cassette. With a 34 oval wide narrow up front , I should be able to climb any hill around here . BTW , I like my saddles right where they’re at . https://cimg5.ibsrv.net/gimg/bikefor...25af8b494.jpeg |
Nice work! I I like the 1x setup also.
|
Originally Posted by hicks
(Post 21640062)
Nice work! I I like the 1x setup also.
Took it on a 12+ mile ride today . Longest I’ve ridden in awhile. On one stretch of road , I actually used top gear and was traveling around 22mph , plenty fast enough for me . |
Originally Posted by kirby999
(Post 21329244)
https://cimg7.ibsrv.net/gimg/bikefor...d69553065.jpeg
Swapped out my saddle for a Brooks B-67 this morning. It’s a little on the heavy side but was fairly comfortable riding today . May adjust the nose up a little to keep from sliding forward so easily before the next ride . |
29x2.0
I saw in an old thread of yours that you were going to try to get 29x2.0 tires on this bike... did it work, or are the 700x40 because you couldn't get the 2.0s on?
|
Originally Posted by JAMMAJ
(Post 22029754)
I saw in an old thread of yours that you were going to try to get 29x2.0 tires on this bike... did it work, or are the 700x40 because you couldn't get the 2.0s on?
|
All times are GMT -6. The time now is 09:03 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.