Truck mount help?
So I have a couple of these mounted in my truck to haul bikes to riding locations.
https://www.amazon.com/Thule-Low-Rid.../dp/B07CGCQJDH they work awesome just drop out the front wheel and lock down the bike and ready to roll. Works for road and mountain bikes and my wifes hybrid too. When my son had his first bike it was smaller and I would put it in the back seat of the truck no issues. Now he got a new bike a Specialized Hotrock. Obviously no quick release and no through axles so anyone have a solution to haul the bike in the back of the truck without bringing tools to remove the front wheel? Is there an adapter of some sort that can be used for my current mounts? I couldn't find anything just wanted to put it out here to see if anyone has had a similar issue/solution. Here is the specific bike: https://www.specialized.com/us/en/hotrock-20/p/154370?color=225992-154370&gclid=EAIaIQobChMIjpat8ofs4gIVFbbICh2H6QfZEAQYAyABEgKNtPD_BwE Thanks. (New bike day pic!) https://i.imgur.com/eymZwzgl.jpg |
My Guess : its a solid axle fitted with nuts right ?
you have a through axle front hub? get another mount for the truck bed with a QR .. The QR stays in the mount, you use a wrench and loosen the nuts holding the front wheel on, and when you get there use the wrench again , to tighten the nuts securing the wheel in the fork. |
sorry, yeah its a solid axle with nuts. I was hoping to avoid un bolting and bolting the wheel every time. I didn't want to carry a wrench and torque tools with me if I didn't have to.
The QR stays in the mount all the time so you can just slip into the fork, lock and go. super handy bike hauling in the bed of a truck. I figured this was going to be my only solution, just hoping for a miracle I guess |
https://cimg2.ibsrv.net/gimg/bikefor...03036728a.jpeg
Get a moving blanket, put it over your tailgate. Put the bike in the bed with the front wheel over the tailgate. |
Originally Posted by jadocs
(Post 20980396)
https://cimg2.ibsrv.net/gimg/bikefor...03036728a.jpeg
Get a moving blanket, put it over your tailgate. Put the bike in the bed with the front wheel over the tailgate. |
Get a TOPLINE model UG-2500. That's what I use and really like it a lot. No disassembly of any kind required.
Jon |
Originally Posted by sdmc530
(Post 20980314)
Is there an adapter of some sort that can be used for my current mounts?
Maybe you're thinking about a mounting system that does not require wheel removal, but that would not be an "adapter", it would be something to use instead of your existing mount. I made something like this out of pvc pipe. It works but you'll find that it takes more time to secure the bikes than it would to remove and reinstall a front wheel. If I were you, I'd just carry the wrench. Wouldn't you want to carry one anyhow in case of a flat? I have a few bikes with solid axles and always pack a 15mm stubby wrench when I ride. I don't think you need to worry about torque measurements because wheel nuts need something like 25-30 ft-lbs, and that is heavy cranking with a short 15 mm wrench. Good luck. I know that you and your son will enjoy your rides. |
Get a ratcheting socket wrench, and it'll only take a minute or two to deal with it.
|
Try a set of these on the side rail of the truck bed. No wheel removal necessary.
https://www.amazon.com/Reese-Explore...9KTF25CF4F1RZE Dan |
Yeah, just going to have to remove the front wheel every time. My goal was to just avoid this. I am going to try the blanket idea today when we go for our ride but short of that I will have to just suck it up and remove the wheel. I don't mind removing the wheel but was hoping for a cheat to not :)
thanks! |
Bike like Dad's
Change the boy's front wheel axle to a QR axle AND teach him how to make sure it's Always Tight ! ;)
.... |
|
Originally Posted by fietsbob
(Post 20981200)
Change the boy's front wheel axle to a QR axle AND teach him how to make sure it's Always Tight ! ;)
.... I did a blanked over the tailgate today and it worked great for running across town but over the road travel that probably isn't great for so I did bike the bullet and order the TOPLINE mount. Will that a try. thanks |
Would something like a hitch platform mount in the bed work for you?
https://cimg9.ibsrv.net/gimg/bikefor...a92703bf08.jpg I'm sure there are other makes, I just know about this one since I've got their hitch platform rack. If you like Thule, they've got the Insta-Gater. https://cimg3.ibsrv.net/gimg/bikefor...2626097643.jpg Etcetera, etc. |
that is pretty cool. If my other option doesn't pan out I will check into those. I like that
|
A slab of plywood on the pickup bed bottom , allows DIY solutions, if money is an issue..
block of wood with another QR axle through it .. fixed to the plywood , etc.. ..... |
Originally Posted by jadocs
(Post 20980396)
https://cimg2.ibsrv.net/gimg/bikefor...03036728a.jpeg
Get a moving blanket, put it over your tailgate. Put the bike in the bed with the front wheel over the tailgate. Do you just set the bike there and hope gravity keeps it in place, or do you also strap down the frame of the bike inside the bed with bungee cords or similar tie-downs? |
Originally Posted by Squeeze
(Post 20982771)
I am considering a small pickup as my next vehicle. I've seen those tailgate pads and have always wanted to ask this:
Do you just set the bike there and hope gravity keeps it in place, or do you also strap down the frame of the bike inside the bed with bungee cords or similar tie-downs? |
Thanks, @jadocs.
|
All times are GMT -6. The time now is 09:46 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.