Best frameset with fork for $300 or less?
**********?
|
Probably the state 6061 eh?
|
Please stop.
|
Whew... was worried you might not start a new thread today.
|
Anything but a state bicycle frameset....
|
Originally Posted by bmontgomery87
(Post 17320387)
Anything but a state bicycle frameset....
|
Eighth inch scrambler.
|
Slightly over your budget but a pake rumrunner frame and fork plus an ird technoglide headset will set you off with a solid budget build.
**** a quick look on universalcycles shows 324 before shipping and taxes for all three. Under 300 at outsideoutfitters. If you dont like the unicrown fork scrod told me in the past he can sell the carbon fork for the pake french separately although that will be a little over your budget. |
leader 725 closeouts are 299.
i'd say that's the best thing you're going to get under 300 bucks. |
Originally Posted by bmontgomery87
(Post 17320704)
leader 725 closeouts are 299.
i'd say that's the best thing you're going to get under 300 bucks. |
Originally Posted by inCOGneto
(Post 17320750)
If your looking for aluminum... but of course we don't know because his question lacks detail
|
......
|
What about the Fyxation frameset?
Eastside Chromoly Steel Fixed Gear Frameset | Fyxation They seem to make fairly good quality components. Frames are made in Taiwan apposed to China and I was very impressed with the quality of the 250g seatpost I'm using from them that was only $30. And personally I think their copper frame looks really nice. Of couse for a similar price you can build a Rum Runner which now uses butted tubes |
Originally Posted by bmontgomery87
(Post 17320814)
True. I just can't imagine doing a budget build with steel unless you're a fan of riding a heavy ass bike that feels like a tank. I've had 5 steel bikes and all of them were a bummer to ride compared to even a low end aluminum build.
|
Originally Posted by Jared.
(Post 17320233)
Please stop.
|
Originally Posted by hardboiled718
(Post 17320853)
is this serious?
If I had 800ish to drop on a good steel frameset with a carbon fork, maybe it'd be okay. It's all personal preference. |
Steel frame with carbon fork, oh geez. weight is not the end all be all imo.
|
My 2011 Soma Rush build - steel frame with steel fork - Weight = 18.5 lbs
My Dolan Pre Cursa build - aluminum frame with carbon/aluminum fork - Weight = 18.7 lbs |
I've heard I could get an Aventon frame with a carbon fork for close to 300 and that would be the best quality for the money.
|
Originally Posted by dpc1192
(Post 17321437)
This forum is lame
|
Originally Posted by Scrodzilla
(Post 17321445)
Mainly because people come on here to ask stupid questions, which in turn yield stupid answers.
Touche |
Originally Posted by TejanoTrackie
(Post 17321238)
My 2011 Soma Rush build - steel frame with steel fork - Weight = 18.5 lbs
I wasn't saying you can't build a nice ass steel bike. I just don't think you can build a light one on a small budget. (Not a weight weenie but lugging around a 25 pound bike sucks if you ride a lot of miles) |
Originally Posted by dpc1192
(Post 17321437)
I've heard I could get an Aventon frame with a carbon fork for close to 300 and that would be the best quality for the money.
|
Originally Posted by bmontgomery87
(Post 17321470)
But how much did you spend on components?
I wasn't saying you can't build a nice ass steel bike. I just don't think you can build a light one on a small budget. (Not a weight weenie but lugging around a 25 pound bike sucks if you ride a lot of miles) Last I checked, the budget Kilo tt doesn't weigh 25 pounds. also, to the OP, here is a cheap option BikeIsland.com - Bicycle Parts, Accessories and Clothing at Affordable Prices with Free Shipping |
Originally Posted by jhess74
(Post 17320377)
Whew... was worried you might not start a new thread today.
|
All times are GMT -6. The time now is 04:26 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.