'Nice' colour??? Yeah, as in 'drop dead gorgeous nice', wow!
|
Yeah, this will replace my Triumph as my commute bike.
Older guy bringing the bike to the curb said "too old to ride a bike." still resonates that the day does arrive............ |
Originally Posted by MikeonhisBike
(Post 8865349)
Picked these up yesterday. Both of them for 30bones off CL. Both are about the same size, they fit me just right. They obviously need some TLC. Im picking up another one tomorrow, most likely swap some parts. Is there such a thing as too many bikes? lol
Whats the best method for getting surface rust off the frame? lol |
Originally Posted by auchencrow
(Post 8863190)
Raleigh America Record, Large Chromalloy frame, upgraded from 10 speed to 12 speed with Shimano DR's and shifters, alloy wheels, seatpost.
$20 on Craig's List and it was a mess. - Added New parts, bar tape, cables and elbow grease: Total investment: $50. http://i254.photobucket.com/albums/h...d-Pursuit8.jpg |
Originally Posted by i-timy
(Post 8868458)
Older guy bringing the bike to the curb said "too old to ride a bike." still resonates that the day does arrive............
|
Originally Posted by HSean
(Post 8855531)
I don't think it hit anything, it's just the wire goes in the frame so it's pushed in making it loook fishy lol
|
Literally pulled out of the scrap metal pile at the dump:
http://i430.photobucket.com/albums/q...Peugeot001.jpg http://i430.photobucket.com/albums/q...Peugeot002.jpg http://i430.photobucket.com/albums/q...Peugeot003.jpg http://i430.photobucket.com/albums/q...Peugeot004.jpg Anybody want to chime in with model/year? |
1986 PH-501 Ventoux?
Others will be able to say more positively, I have a habit of being in the ballpark but off-base. |
85 or 86 PGN10, a nice find indeed!
No lugs. PH-501 Lugs.....PGN10 Looks like they broke the rear axle at some point, either that or a precaution for a heavier rider. It should be a quick release, not a bolt on. Hub looks correct though. EDIT On second look, that is a Shimano pie plate. Should be Maillard Helicomatic if memory serves. Mine stayed stock about an hour once I got it home:D.,,,,BD |
Originally Posted by BluesDaddy
(Post 8877890)
Literally pulled out of the scrap metal pile at the dump:
(pics) Anybody want to chime in with model/year? |
Yesterday I got a few things
one b-17 with copper rivets and chrome rails (for a friend) scored a Ideale model 90 alloy rail/cantle plate with clamp also picked up these shoes on the bay: http://farm4.static.flickr.com/3317/...ab61a52f_o.jpg |
I've been looking for a Panasonic on and off for a while, so when I saw this 1987 DX-4000 on CL for $50, I called and offered $100 just to be sure I got it. Looks pretty good, a few paint scuffs here and there and needs overhauled and new hoods, but overall I'm pretty pleased. All the 105 is present and the saddle is in OK shape. Blackburn trainer came with. Probably hang on to this one if it rides nicer than my old Cannondale, gotta flip one though:) Better pics when I get her cleaned up.
|
Originally Posted by Bikedued
(Post 8879247)
85 or 86 PGN10, a nice find indeed!
No lugs. PH-501 Lugs.....PGN10 Looks like they broke the rear axle at some point, either that or a precaution for a heavier rider. It should be a quick release, not a bolt on. Hub looks correct though. EDIT On second look, that is a Shimano pie plate. Should be Maillard Helicomatic if memory serves. Mine stayed stock about an hour once I got it home:D.,,,,BD The wheelset is SR hubs/Araya rims w/presta... don't know how the pie plate got there. Thanks for the help with the ID. I was giddy when I got it free of the bedsprings and refrigerator doors. When you see presta valve stems and Reynolds decals, you know you're on to something! And it's my size to boot! |
Originally Posted by BluesDaddy
(Post 8877890)
Literally pulled out of the scrap metal pile at the dump:
Anybody want to chime in with model/year? |
Just bagged this for $50. A freakishly large Raleigh touring bike:
http://images.craigslist.org/3me3p93...579a2f1682.jpg |
Originally Posted by jtarver
(Post 8882545)
Probably hang on to this one if it rides nicer than my old Cannondale, gotta flip one though:) Better pics when I get her cleaned up.
On the PGN10. The Sachs Rivals are stock, shifters aren't, wheels aren't. I have mine set up with that cream silver 105 7 speed with dual pivot aero brakes, It's really light, and rides like only a Peugeot can. I also happen to love the rainbows and checkers graphics. My favorite out of all the Peugeot decals. I have changed the bars and stem since the pic. The top of the drops were just too steep for my comfort level. They were also too narrow. http://i114.photobucket.com/albums/n...ker/105501.jpg |
I love the props that the Peugeots are getting right now. I can't wait to finish my PH501 Ventoux so I can post it here. I was all original,but I may change over to indexed downtubes just to be more rider friendly for my sons. They just don't have the feel for friction.
|
Found a TS-2, WAG-1 and a dropout alignment tool at a garage sale today:D
http://i178.photobucket.com/albums/w...s/IMG_4663.jpg |
Originally Posted by bigbossman
(Post 8884489)
Just bagged this for $50. A freakishly large Raleigh touring bike:
http://images.craigslist.org/3me3p93...579a2f1682.jpg |
my catches from the hour I spent at the trexlertown swap meet today:
http://www.brian-payne.com/gallery/m...serialNumber=1 brooks pro - $5 brooks b17 - $40 - this was before I found the other two brooks.. brooks b5n - $5 modolo speedy non aero levers and cables - $5 Honjo 700c fenders - $15 tall nitto stem with a very short reach - $1 mtb stem for my beater mountain bike - $1 4 tubes for $2.50 each 6 sets of shift cables for $1 each. not bad eh? |
Originally Posted by -holiday76
(Post 8886482)
my catches from the hour I spent at the trexlertown swap meet today:
http://www.brian-payne.com/gallery/m...serialNumber=1 brooks pro - $5 brooks b17 - $40 - this was before I found the other two brooks.. brooks b5n - $5 modolo speedy non aero levers and cables - $5 Honjo 700c fenders - $15 tall nitto stem with a very short reach - $1 mtb stem for my beater mountain bike - $1 4 tubes for $2.50 each 6 sets of shift cables for $1 each. not bad eh? |
Here are my catches from the Trexlertown swap meet:
http://i243.photobucket.com/albums/f...s/Parts010.jpg http://i243.photobucket.com/albums/f...s/Parts011.jpg http://i243.photobucket.com/albums/f...s/Parts012.jpg Best deals: FSA crankset was $40.00 with the BB. I couldn't say no. Shimano barend shifters were $5.00. Meeting up with JunkYardBike in the parking lot. :D Did a deal for the wheels, many of the brakes, derailleurs, and small parts. Thanks very much! You the man! |
Originally Posted by Machin Shin
(Post 8886588)
Nice catch! You got your Technomic. :)
|
Nice bunches of stuff you guys. Machin I like the 600 crankset. I'm a big fan of the tri color 600. Also spotted a pair of 105 long reach calipers. Let me know if any of that is going on the clearance rack...
|
Haha you guys are beasts! Very nice catches!
Machin what'd you do, go to the swap meet with a wheel barrow? :) |
All times are GMT -6. The time now is 02:10 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.