Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Classic & Vintage (https://www.bikeforums.net/forumdisplay.php?f=181)
-   -   1989 Trek 930 Single Track (https://www.bikeforums.net/showthread.php?t=1220988)

grizzly907la 01-06-21 02:58 PM

1989 Trek 930 Single Track
 
I just bought a 1989 Trek 930. I'm having a hard time finding the specs for the bike. I know its a steel frame bike. I know that the derailleurs are exage 400 lx. I might replace the front derailleur. The rear one looks okay. Any thoughts and/or links? Thanks!
https://cimg7.ibsrv.net/gimg/bikefor...b6233f9274.jpg

thook 01-06-21 03:15 PM

here's the '89 brochure. (scroll way down for mtbs) i don't see a 930 in the brochure, although the 950 matches your color

http://www.vintage-trek.com/images/t...89Brochure.pdf

thook 01-06-21 03:24 PM

there is a 930 listed in the '90 brochure

http://www.vintage-trek.com/images/t...rek/90Trek.pdf

3speedslow 01-06-21 03:25 PM

Hey!

I saw that Trek come up on CL! Nice one. I see you live around there. That part of our state has some nice bikes for sale!

My 930 is a 96 year. Love it!

Clang 01-06-21 03:39 PM


Originally Posted by grizzly907la (Post 21865533)
I just bought a 1989 Trek 930. I'm having a hard time finding the specs for the bike. I know its a steel frame bike. I know that the derailleurs are exage 400 lx. I might replace the front derailleur. The rear one looks okay. Any thoughts and/or links? Thanks!
https://cimg7.ibsrv.net/gimg/bikefor...b6233f9274.jpg

This is a 1992 model. I have the same bike in the other color offered for this year: red.

Catalog link: It's annoying that the page with the picture for the 930 is missing from this pdf, but the specs are there on page 34.
Trek Catalogue 1992 | Catalogues | Retrobike

grizzly907la 01-06-21 04:58 PM


Originally Posted by Clang (Post 21865615)
This is a 1992 model. I have the same bike in the other color offered for this year: red.

Catalog link: It's annoying that the page with the picture for the 930 is missing from this pdf, but the specs are there on page 34.
Trek Catalogue 1992 | Catalogues | Retrobike

Thanks for the info!

grizzly907la 01-06-21 05:02 PM


Originally Posted by 3speedslow (Post 21865581)
Hey!

I saw that Trek come up on CL! Nice one. I see you live around there. That part of our state has some nice bikes for sale!

My 930 is a 96 year. Love it!

I'm in western NC, near Asheville. I figure that I can build it into a respectable touring bike.

3speedslow 01-06-21 06:30 PM


Originally Posted by grizzly907la (Post 21865717)
I'm in western NC, near Asheville. I figure that I can build it into a respectable touring bike.

I would say you can! Progress pics when you get a chance.

grizzly907la 01-06-21 06:45 PM


Originally Posted by 3speedslow (Post 21865859)
I would say you can! Progress pics when you get a chance.

I was thinking about filming the work, but I will take plenty of pictures. I just took apart the rear wheel hub. I got some mad scientist ideas for this bike. I just took out the rear axle and free wheel hub. I'm pretty sure it needs to be serviced. My biggest obstacle is finding a spot where I can spray paint it (the current color scheme isn't doing it for me, plus the current had dings, and scratches. I don't want to be touring on what looks like a meth bike.) Once I've got the old paint off, that and buying components. I might swap the fork out for an inexpensive carbon, fork and mount a front disc brake on it. I considered getting a bracket brazed on the back, but decided it against it because it seems to complicated and expensive. If I keep the original fork, I'm going to upgrade the brakes from cantilevers to v-brakes for the front and back.

dedhed 01-06-21 09:14 PM


Originally Posted by grizzly907la (Post 21865877)
I'm going to upgrade the brakes from cantilevers to v-brakes for the front and back.

Levers may not be V brake pull compatible

thook 01-07-21 12:39 AM


Originally Posted by dedhed (Post 21866110)
Levers may not be V brake pull compatible

they are, though. tektro 520's are specifically made for them. i'd had them on a cross check at one time. they work fine if you keep the pads adjusted close to the rim and have good pads. the standard black ones just aren't that great, ime. i have some v-brakes on one ride currently. i put some kool stop salmon mtb pads on last week and i have to use caution slamming on the brakes. modulation is good enough

dedhed 01-07-21 07:58 AM


Originally Posted by thook (Post 21866309)
they are, though. tektro 520's are specifically made for them. i'd had them on a cross check at one time. they work fine if you keep the pads adjusted close to the rim and have good pads. the standard black ones just aren't that great, ime. i have some v-brakes on one ride currently. i put some kool stop salmon mtb pads on last week and i have to use caution slamming on the brakes. modulation is good enough

OP has flat bars and didn't mention converting to drop bars which are what 520 levers are for. Nor did they mention what the existing levers are or changing levers at all.
The OPs levers may in fact be switchable between canti pull and V pull, but without knowing what they are, I can't say.

thook 01-07-21 02:18 PM


Originally Posted by dedhed (Post 21866488)
OP has flat bars and didn't mention converting to drop bars which are what 520 levers are for. Nor did they mention what the existing levers are or changing levers at all.
The OPs levers may in fact be switchable between canti pull and V pull, but without knowing what they are, I can't say.

good grief. my bad. hot toddies chasing a sinus eruption leads to neural paralysis i guess. where was i last night?

yeah...ignore what i said then

Clang 01-07-21 03:14 PM

There was a nice '92 Trek 930 recently on Blue Lug's Flickr.
https://flic.kr/p/2khUPi9

https://cimg1.ibsrv.net/gimg/bikefor...3b3385c8b7.png

grizzly907la 01-08-21 12:24 PM


Originally Posted by dedhed (Post 21866488)
OP has flat bars and didn't mention converting to drop bars which are what 520 levers are for. Nor did they mention what the existing levers are or changing levers at all.
The OPs levers may in fact be switchable between canti pull and V pull, but without knowing what they are, I can't say.

The bike originally came with flat bars, though I am going to replace them with some trekking bars. I am also replacing the shifters and levers.

I've also used long pull levers, with caliper brakes on my old Denali and they worked just fine. Dumb luck, maybe.

9volt 01-08-21 07:59 PM

Here's a purple 930


https://cimg3.ibsrv.net/gimg/bikefor...b62026250.jpeg

Korina 01-09-21 01:21 AM


Originally Posted by grizzly907la (Post 21865877)
I was thinking about filming the work, but I will take plenty of pictures. I just took apart the rear wheel hub. I got some mad scientist ideas for this bike. I just took out the rear axle and free wheel hub. I'm pretty sure it needs to be serviced. My biggest obstacle is finding a spot where I can spray paint it (the current color scheme isn't doing it for me, plus the current had dings, and scratches. I don't want to be touring on what looks like a meth bike.) Once I've got the old paint off, that and buying components. I might swap the fork out for an inexpensive carbon, fork and mount a front disc brake on it. I considered getting a bracket brazed on the back, but decided it against it because it seems to complicated and expensive. If I keep the original fork, I'm going to upgrade the brakes from cantilevers to v-brakes for the front and back.

You're mad! Mad I say!!

Good luck getting the paint off; Imron is automotive paint, and very tough. For a paint booth, if you have a furniture store around, see if they'll give you one of their oversized cardboard boxes; refrigerator boxes work well too. Dings and scratches are called "patina" around here; battle scars showing the bike's had a life. But, to each their own; paint away! Definitely make a rebuild thread. We like to watch... :D

And since we're showing off our 930's,

https://cimg9.ibsrv.net/gimg/bikefor...0f2947e8ba.jpg
Zoe (Washburn), my badass off-pavement ride.

Jeff Neese 01-09-21 06:52 AM

As has been pointed out, it's a '92. Here's mine.

That bike and others like it are a very flexible platform. When I took this picture I had trekking bars, but later converted to drop bars. These make respectable touring frames, but because of the higher bottom bracket it's not going to be as stable under really heavy loads as a purpose-built touring bike does.

https://cimg1.ibsrv.net/gimg/bikefor...1c258d3fa5.jpg

Mr. 66 01-09-21 11:03 AM

Since everyone else is showing theirs. My Mean green 930.

https://cimg2.ibsrv.net/gimg/bikefor...ff0ebd8906.jpg

Built up with Deore 9 speed. This my son's bike for campus uses.

3speedslow 01-10-21 08:56 AM

Showing? Well okay!

https://cimg9.ibsrv.net/gimg/bikefor...5f841d835.jpeg
96’ in inkwell blue.

grizzly907la 01-10-21 07:28 PM

I shall take plenty of pics! Not to worry, I'll add my own battle scars to the bike....as I am building it back up and I am sure to get some as I ride it.

grizzly907la 01-10-21 08:10 PM


Originally Posted by Jeff Neese (Post 21869549)
As has been pointed out, it's a '92. Here's mine.

That bike and others like it are a very flexible platform. When I took this picture I had trekking bars, but later converted to drop bars. These make respectable touring frames, but because of the higher bottom bracket it's not going to be as stable under really heavy loads as a purpose-built touring bike does.

https://cimg1.ibsrv.net/gimg/bikefor...1c258d3fa5.jpg

Define heavy and why would a higher bb effect stability? Just curious.

Jeff Neese 01-11-21 04:42 AM


Originally Posted by grizzly907la (Post 21872017)
Define heavy and why would a higher bb effect stability? Just curious.

This is heavy. The bike is a 1983 Trek 720. Lower BB = lower center of gravity, improved stability.

https://cimg4.ibsrv.net/gimg/bikefor...ff5d210989.jpg

grizzly907la 01-11-21 09:33 AM

That does look heavy. I have a steel shogun frame, that needs stripping and painting. Thanks for the answer. That helps me better understand things.


All times are GMT -6. The time now is 03:23 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.