WTB Your high end hi ten bike
I am looking for a project bike. Do you have a gas pipe bike that needs some love? The ideal candidate will have anywhere from some to a lot of rust (patina). Turkey levers are preferred and I must say the frisson of fear when I squeeze the brake lever and nothing happens is worth top dollar to me. Bar tape that streams out behind the bike when in motion is a plus. I ride 56-57 cm frames, so something in the range of 60+ or 52- cm would be relished as an additional project challenge and I will pay extra for the appropriate 15 cm or 5 cm stem.
There was a perfect bike listed here about a year ago but I couldn’t find it. I am near to closing on a refinancing of my house with cash out so sky is the limit on price. Whatcha got? |
Gosh someone on here was selling a great tribute bike, I bet you could pick it up cheap ...
https://cimg3.ibsrv.net/gimg/bikefor...64f5373bfa.jpg The crankset isn't cottered so I apologize! |
I've been using this crashed Fuji as a christmas decoration but you're welcome to the bike, the rust, the trashed wheels and the cottered crank for a negotiable price certainly somewhat less than what you cashed out of your house:
https://cimg5.ibsrv.net/gimg/bikefor...ae92ba11df.jpg |
I cant help with the whole bike(no way am I parting with my Penneys Special Racer).
However I have the actual racing aero disc that was used during efforts to win several tour time trials. Oh and some mightanium superbe recording turkey levers. https://cimg6.ibsrv.net/gimg/bikefor...63fc5dcdcd.jpg |
Originally Posted by bikemig
(Post 21995373)
I've been using this crashed Fuji as a christmas decoration but you're welcome to the bike, the rust, the trashed wheels and the cottered crank for a negotiable price certainly somewhat less than what you cashed out of your house:
https://cimg5.ibsrv.net/gimg/bikefor...ae92ba11df.jpg |
Originally Posted by Spaghetti Legs
(Post 21995406)
Lotsa great options here, but this one might be the best. Can the snow be included?
https://www.amazon.com/Instant-Snow-...-1041737927472 And check this out:
|
Originally Posted by bikemig
(Post 21995448)
I'll knock $18 off the price so you can buy this instant snow powder from Amazon:
https://www.amazon.com/Instant-Snow-...-1041737927472 And check this out:
|
|
I have the perfect candidate:
https://cimg6.ibsrv.net/gimg/bikefor...a74ae1ca87.jpg |
Originally Posted by nlerner
(Post 21995974)
I have the perfect candidate:
|
Originally Posted by bikemig
(Post 21996025)
That bike is smoking hot. I'm not sure Spaghetti Legs can afford it even after refinancing his house.
|
Look for a 1976 or so Motobecane Mirage in that classic subdued silver or silvery-blue near-monochromatic colorway. It'll look so good you won't notice slogging uphill on a 30+ lb bike.
Seriously, though, wish I'd kept mine. I'd have upgrade most of the components by now. But that subtle paint and swoopy curvy oh-so-French fork... ooh-la-la. |
Here you go:
https://live.staticflickr.com/5339/3...0a71bd09_b.jpg It's got a 75 degree head tube angle and corresponding wrinkles in the top tube and down tube, but that's part of the challenge, right? |
Originally Posted by Andy_K
(Post 21996679)
Here you go:
It's got a 75 degree head tube angle and corresponding wrinkles in the top tube and down tube, but that's part of the challenge, right? Now that it’s April 2, I find myself, again, strangely attracted to double butted tubing and pointed/tapered lugs. Go figure. |
Originally Posted by Andy_K
(Post 21996679)
Here you go:
https://live.staticflickr.com/5339/3...0a71bd09_b.jpg It's got a 75 degree head tube angle and corresponding wrinkles in the top tube and down tube, but that's part of the challenge, right? |
Originally Posted by nomadmax
(Post 21996798)
That would be perfect.......but the fork is bent ;)
|
hey doc,is your perfect ten should be ten speeds total> I' m making a reasonable guess that you prefer a 53 /54-55 c-c frame c-c seat tube of course and a short stem?I don't want to be nosey but my sister lives near manssas .va but I dont think she has what your looking for,If the sky is the limit I would try a paris sport,from new jersey or a legueune cause they are classy and no one will give ithem a second look unless they have eyes in their head in which case they can be bought for love or money.........meanwhile i will check the nj craiglist and find you something for a small finders fee....actuataly I'm indepentendly weathy and this is a hobby of mine.....boy this is not a quick reply but who cares.....now you must by now I'm just kidding around but i will loofk for that perfect ten......ps. good luck in your search for the grail,I havent found it yet, pps When I was a child Iprayed and prayed for a bike but i finally realized that god didn't work thtat way.................So I stole a bike and prayed for forgiveness!!! happy easter passover and spring in general........not my words but the sentiment is clear
|
there is a 6cm sr stem for 13 plus on this forun
|
Stem included because it won’t come out...stripped bolts no charge. Potential for internal cable routing through the holes...
https://cimg6.ibsrv.net/gimg/bikefor...a772b3f49.jpeg https://cimg7.ibsrv.net/gimg/bikefor...47e74b420.jpeg https://cimg8.ibsrv.net/gimg/bikefor...af4f06bc5.jpeg https://cimg9.ibsrv.net/gimg/bikefor...91188b4a7.jpeg https://cimg1.ibsrv.net/gimg/bikefor...f901d687b.jpeg |
Originally Posted by jdawginsc
(Post 21999274)
Stem included because it won’t come out...stripped bolts no charge. Potential for internal cable routing through the holes...
|
Originally Posted by Spaghetti Legs
(Post 21999474)
Perfect except for I need a little steeper seat tube angle.
|
Originally Posted by bikemig
(Post 21999495)
This bike is a ringer. It has decent tubing and forged drop out. Everyone knows gaspipe tubing is just better. Just throwing some shade on this bike so you don't waste your money on it when I have a perfectly good crashed Fuji with a steel cottered crank to sell.
and decent tubing is intact...this is not, which actually makes it less decent tubing... Drillium in the tubes, bay-bee! PS: I do have Schwinn LeTour with rust...but unfortunately it is solid and intact... |
All times are GMT -6. The time now is 03:10 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.