|
ID hub? solid axle
Does anyone have an idea on the maker of this hub? thanks.
https://cimg4.ibsrv.net/gimg/bikefor...a5c575efde.jpg https://cimg5.ibsrv.net/gimg/bikefor...a17e9751a4.jpg https://cimg7.ibsrv.net/gimg/bikefor...5e3999b6ff.jpg https://cimg6.ibsrv.net/gimg/bikefor...a60b8d8d33.jpg |
I searched velobase.....entry by entry; no match
|
|
I removed the washers in hopes that the cones or washers were stamped; nothing there. Its weird, not a single makers mark, unless the hub once had a sticker (?)
|
-----
In one of the images there appears to be a marking on the barrel. Or is this just a smudge/dirt? There is certainly a good possibility that however it was marked/sold it may have been produced by Fratelli Brivo. The torpedo shaped track nuts are certainly distinctive. Cannot recall seeing them afore. If you envision searching, keep them in mind - perhaps the best clue. Another member who may be able to shed illumination is @amirinisrael ... ----- |
Originally Posted by juvela
(Post 20998637)
-----
In one of the images there appears to be a marking on the barrel. Or is this just a smudge/dirt? There is certainly a good possibility that however it was marked/sold it may have been produced by Fratelli Brivo. The torpedo shaped track nuts are certainly distinctive. Cannot recall seeing them afore. If you envision searching, keep them in mind - perhaps the best clue. Another member who may be able to shed illumination is @amirinisrael ... ----- |
Originally Posted by juvela
(Post 20998637)
-----
In one of the images there appears to be a marking on the barrel. Or is this just a smudge/dirt? There is certainly a good possibility that however it was marked/sold it may have been produced by Fratelli Brivo. The torpedo shaped track nuts are certainly distinctive. Cannot recall seeing them afore. If you envision searching, keep them in mind - perhaps the best clue. Another member who may be able to shed illumination is @amirinisrael ... ----- https://www.velovilles.com/en/parts/...oles-oxid.html |
That's a new one for me. Very cool. I have never seen an FB, Gnutti, Siamt nor Campagnolo like it. Of course, any of those companies could have made it, never say never.
But there are many companies that made stuff that are new to me. "IM" high flange 3-piece hubs currently on ebay.it. Never seen them before this listing. https://cimg5.ibsrv.net/gimg/bikefor...827ab55f10.jpg Same seller, blank barrels. Same "IM" company? I haven't a clue. https://cimg0.ibsrv.net/gimg/bikefor...3765c33a85.jpg |
Short lived Cambio Corsa pattern front hub
Looks similar to, but not identical to, an old Campagnolo 3-pc hub that I have:
https://cimg9.ibsrv.net/gimg/bikefor...c967c62f2c.jpg Most Campagnolo Cambio Corsa hubs and hub diagrams have a simpler flange design. This hub has "ballooned" flanges Your hub has more contoured flanges. Amir |
-----
Thanks so much Amir! The right man for the job. ;) ----- |
| All times are GMT -6. The time now is 03:00 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.