Rust proof?
Since in my area have been getting lot of rain for the whole summer, my question has come up to the point where I try to find a solution Of my worrisome about rust building on my bike. Is there a proper way to equip/clean my bike to ride in the rain to prevent rusts from building? Before and after ride in the rain? Anything will help. Thanks.
|
Treat the inside of you frame with "Frame Saver", and the outside with car wax.
|
Originally Posted by Doug64
(Post 20461367)
Treat the inside of you frame with "Frame Saver", and the outside with car wax.
wiping a wet bike off with a shop towel helps. keeping the little "limber" holes clear helps to drain water out of the frame. hanging bike up so moisture can flow to those cleared holes helps. turning a fan on the hanging bike helps dry out the saddle faster. also if real soggy, I lightly spritz the chain with wd-40 and wipe it off,lightly with a paper towel - I know some will throw flame about the Wd-40 use. |
Originally Posted by martianone
(Post 20461769)
there is no such thing as rust or corrosion proof.
The chain and gears, and the spokes on the wheels are still susceptible, though. |
Originally Posted by doug64
(Post 20461367)
treat the inside of you frame with "frame saver", and the outside with car wax.
|
Originally Posted by 2pedals5
(Post 20461273)
Since in my area have been getting lot of rain for the whole summer, my question has come up to the point where I try to find a solution Of my worrisome about rust building on my bike. Is there a proper way to equip/clean my bike to ride in the rain to prevent rusts from building? Before and after ride in the rain? Anything will help. Thanks.
|
Go to your local auto parts store or a hardware store and buy a spray can of automotive rustproofing oil...I've used a product called Rustcheck and sprayed it on the inside of my steel frames.
|
Originally Posted by Patriot1
(Post 20463215)
solution....a Titanium bicycle. Done! |
I like and trust Boeshield for rust proofing. It is purpose made for the job by people who know their business.
|
Originally Posted by Patriot1
(Post 20463215)
solution....a Titanium bicycle. Done! |
Originally Posted by Doug64
(Post 20461367)
Treat the inside of you frame with "Frame Saver", and the outside with car wax.
|
Originally Posted by 2pedals5
(Post 20463547)
....really?
Frankly, unless you're riding your bike regularly through seawater in puddles or along the beach, I don't think it's really that much of a concern.
Originally Posted by 2pedals5
(Post 20463560)
What is inside and outside frame?
|
Originally Posted by General Geoff
(Post 20463565)
Some people buy titanium framed bicycles specifically for their corrosion resistance (pretty much no natural environment on earth will affect them) and immunity to UV damage (which the epoxy resin in carbon fiber can be degraded over time by).
Frankly, unless you're riding your bike regularly through seawater in puddles or along the beach, I don't think it's really that much of a concern. |
TriFlow. I've used it for decades on all sorts of mechanical equipment--especially bikes--and it's never failed me.
|
Originally Posted by 2pedals5
(Post 20463570)
I see. Let's put the concern on frame and money aside. That leaves me the most important parts that flows me on the road which is pedals, chain, shifter(they are metals right) and the I'm..rest derailure(sp?) How can I keep up with rust free daily through rain or no rain?
I would give it a rinse with clean water after riding through brined/salted roads during winter, if that's a thing you do. |
The salt air of places like Martha's Vineyard is a killer to bikes that spend their life in it.
I've treated several frames with AMS Oil Heavy Duty Metal Protector. One $8 can will do 3 bikes. For bikes that are going to see a harsh environment, I pack the bearings in lots of marine trailer hub grease; the stuff that can both hold up at highway speeds under load and then get submerged several feet to launch the boat. Nothing a bicycle see will ever touch it. (Any auto parts store.) I also use that grease on threads. If you really want a finish that will protect a steel frame in any conditions. paint it with a two part epoxy paint. (A brush does a surprisingly good job. Epoxy "flows" as it sets up and brush marks disappear. (Don't even think about touching the paint at this time!) Ben |
Problem is most components use chrome plated steel bolts..
there is no perfect cure short of the Moon which is too small to retain an atmosphere, .. with Oxygen in it.. given Rust is Iron Oxide after all .. |
I have seen some horrendously rusted bikes, but for the most part they were ones that lived outside in all weather. If you store your bike inside and do normal care and maintenance you should not have any issue with rust. There are a lot of phobic tendencies here about rust on frames, especially internally, and that sells a lot of products that supposedly treat the condition (the phobia, that is). I have never treated a frame with Frame Saver or the like and have had no internal rust issues on any of the many bikes that I own. I own 7 steel bikes ranging from 20-50 years old. My daily commuter bike, which gets the most abuse, is over 45 years old, ridden in all weather, all year and the only rust is the small amount that forms if I get a chip in the paint and don't attend to it quick. After every wet ride, I just wipe it dry with a damp rag. I do use anti-seize on the BB threads, and grease the stem and seat tube but that's about it.
To summarize: Wipe it down when wet, store it in a dry area, maintain the components, and don't worry. |
Originally Posted by wolfchild
(Post 20463279)
It take a very very long time for a chromoly steel bike frame to rust out to a point of it being unrideable. I don't think I've ever heard of it.
|
Originally Posted by 2pedals5
(Post 20463560)
What is inside and outside frame?
|
Originally Posted by General Geoff
(Post 20461816)
Carbon fiber is corrosion proof, and titanium and aluminum are so resistant that even riding through brine all winter will not really affect them.
The chain and gears, and the spokes on the wheels are still susceptible, though. I've had a couple steel road bikes which were made in the 1940's, and they are still in good condition now. |
You really have to neglect a bike for it to rust. And even then its typically the stuff i.e. pedals, wheels, seat post, stem, etc., that rusts and not the frame. The only exception is a Walmart bike. It may look identical to the bike you bought at your LBS when its shiny and new, but a year from purchase is when you'll really see what you get for 100 bucks.
The simplest way to keep in from rusting is to stay out of the rain. If it does get wet, rinse it with tap water as soon as you get home. Even better, wash and dry it. |
Don't ride your nice bikes in the rain. Get a rain bike. Rain bikes are cheap bikes that you don't care about ruining. Make sure to slap some plastic full size fenders on it. The fenders are there to protect you, not the bike. Beat the hell out of the bike all you want, just as long as it still works.
Rain bikes are fun. It's a game to see how long you can keep the thing going. It can teach you a lot about maintenance when you have a cheap beater bike to work on which you don't care about as much as your more expensive nicer bikes. |
Originally Posted by toast3d
(Post 20465932)
Don't ride your nice bikes in the rain. Get a rain bike. Rain bikes are cheap bikes that you don't care about ruining. Make sure to slap some plastic full size fenders on it. The fenders are there to protect you, not the bike. Beat the hell out of the bike all you want, just as long as it still works.
Rain bikes are fun. It's a game to see how long you can keep the thing going. It can teach you a lot about maintenance when you have a cheap beater bike to work on which you don't care about as much as your more expensive nicer bikes. |
Ti is an awesome material and after riding a ti bike for over a year now, I can say it may rival my steel bikes and certainly is getting the most riding these days. The corrosion resistance is great but the ride quality is even greater and it is pretty light too!
|
All times are GMT -6. The time now is 09:37 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.