Carbon road rim wheels for $135.66 and free shipping
 

36mm and 50mm

Not the lightest and no idea on the hub quality.
At the same time, this is around what Vuelta wheels from Nashbar were 4-5 years ago so it's a pretty small risk.

Listed 15% off code brings the cost down.
https://www.the-house.com/qpuc70036p...ub-bike-wheels
https://www.the-house.com/pc70050fhg...ub-bike-wheels

And only 17mm rim width.

Yes, 17mm internal and 24mm external.

I have 3 sets of wheels with H+Son Archetype rims which are 17.5mm internal and 23mm external and they are perfectly fine.
Dont look now, but farsports even offers a 16mm internal carbon rim. Prepare the fainting couch! https://www.wheelsfar.com/customize-...set-p0057.html

Is that an aluminum brake track?

People will hate on this stuff, but I bought a set of carbon Superteam wheels on Amazon a few years ago. I paid $325 for them, so not as cheap as these, but they're better than I expected. I figured with Amazon Prime if I got them and they were terrible, I could theoretically return them. I didn't have any issues though, and the wheels are actually pretty decent. I use them on an old rim-brake CX bike that I mess around on a pump track with, and do occasional casual rides with my kid. I have put around 1000 miles on them since, and haven't had to do anything to them during that time. They're still perfectly true, despite riding them on dirt jumps and screwing around in a park doing bunny hops and wheelies. My only complaint is that the rear hub is ridiculously loud.

I wouldn't ride a $135 wheelset, no matter what it's made of.

When wheels break, bad things can happen.

I know a few people who use Superteam wheels, and have had good experiences with them.

If it makes you feel more comfortable, you can spend more money for the same wheels here... https://www.framedbikes.com/products...-wheelset-700c

EDIT: Or direct from the Manufacturer... https://pubwheels.com/collections/ro...-road-wheelset

I guess I'm risk averse when it comes to such things. I still wouldn't ride them. They may be just fine, but I'm happy to pay more money for a brand that has a reputation to protect.

I learned my lesson as a kid when I ordered a "Swiss Army" knife for an unbelievably low price. It was pure crap, but I still have it to remind me to never fall for that again.

At what price would you allow yourself to purchase a 'good deal' carbon rim wheelset? $400? $800? $1200?
Not arguing here- your example should ring true for anyone who has purchased things in life. But there is a point where everyone is willing to take a risk, so just curious what yours is.

I just bought my second set of superteam wheels. Would buy a third but the Madone has a decent bontrager wheel set.


I can’t justify spending 2500 dollars plus on a wheelset. Maybe one day, but not today.

I can't answer that question without knowing what the 'good deal' wheel set is. It's more about the wheels than the price.

That's an interesting thought experiment. The $135 wheels are sooo inexpensive that the main risk is being stranded -- or, even worse, having a wheel collapse while riding. As the price rises, my confidence in the wheels may rise, but they become less of a bargain -- and the price differential vis-a-vis 'name brand' wheels gets smaller.

I suspect that much of this is based in a couple factors: a person's financial resources, and their experience. I must have the money for an expensive name-brand wheelset, because I just bought one. And my experience with inexpensive off-brand wheels, though almost twenty years ago, was unfavorable -- I got stranded three times before giving up on them.

In the end, I also must agree with TC's point, below:

A couple of points:

1) I would not trust wheels made by a brand nobody has ever heard of. Who the heck is Pub?

2) If you check the weights of those wheels, you can get a good alloy wheel with good quality name brand parts at those weights or even lighter.

The House Dot Com seems to have some Insane Deals on bike components. In the past month I have bought: (a) an Easton EA90 stem 100 mm ($22), (b) a pair of Shimano 105 BR-5800 rim brake calipers ($50), and (c) a pair of Shimano 105 ST-R7000 STI levers ($198), each with an additional 15% off. The first two items were the last unit of each in stock; the item disappeared from the website as soon as I placed my order. The last is en route right now and is still available. My conjecture (based on the foregoing and on the limited selection) is that this store may be exiting the bike business. While I would not hesitate to order components made by reputable manufacturers (such as those I had ordered), I might have second thoughts about buying unknown wheels from a store if that were the case.

What if the wheels were $700 marked down to $135 because they are effectively overstock in an unused setup moving forward? These had been priced at $700 on Pub's site. Pub is just a component brand of Framed, like a Oval is to Fuji.

I bought a set because I thought it'd be fun to try out. If they end up being good, I got a steal. If they suck, I paid very little and they will have met my pessimistic expectations. It's a relatively low investment, financially speaking.
Yes they could explode, no I am not at all worried they will explode.
They will be on a road bike that is basically a backup to the current backup to my main road bike. In other words, not used much, unless that bike becomes my first backup...then it'll go from being used not much to being used a little.

I've been considering some btlos wheels for my main road bike, but the wheelset I have has been so darn reliable and we'll spec'd, there really hasn't been justification to buy some btlos carbon wheels for it.

If these ride like $700 wheels, I will be happy since the wheelset I was going to use is a few hundred grams heavier.

Pub is just a house brand for components under The framed bike brand. It's like Oval and Fuji. These were $700 until they dropped the price to move out old stock inventory that is no longer needed since it's a legacy eesign(130qr rim brake).

Yes a good alloy wheelset will be lighter. I have multiple quality alloy wheelset that weigh the same or less.

If they sell 'em for $135, they are $135 wheels. Doesn't matter what price was originally printed on the sticker.

I hope they work for you -- they'll probably be fine.

I found this on the Pub Wheel website in the About Us section:

“Our ‘stock’ (still hand built in MN) carbon wheelsets. They’ll be built by a master wheel builder who’s pedigree includes over 30 years in the industry. He’s been a sponsored cyclist, he’s worked in the Shimano Pro Road Pits, and spent the last 22 years dedicated to wheel building. We pair our knowledge about wheel building with our knowledge about you for a truly game changing experience.”

$135 barely covers 72 high quality spokes from a bike shop supplier at cost.

Try as I might, I can't think of a way to make this pencil out with budget everything at wholesale rates. Somebody, somewhere had to get paid.

I'd sooner run automated, machine built, Formula cup & cone freewheel hubs with cheddar cheese bearings & straight 14 gage spokes on Zac 19 rims. At least then I'd know what I'm getting.

1600 grams? For 1? Wow.

Good lord.

- its clearance. Items on clearance may be sold for a small profit, break even cost, or a loss. These were sold for a higher price before the clearance...hence the term clearance.
- these have 44 spokes. Your comment about 72 spokes is of little consequence here because these have fewer spokes and a wheel company will procure spokes at a lower cost than an ibd.
- they are wheels that are rim brake, QR, and 130mm. They don't fit into the brand's lineup anymore, so they are being cleared out. This is from the company. Not sure if these are leftover warranty wheels or what.
- why so you think 1 wheel weighs 1600g?


This thread was just a psa in case anyone wants to try the wheels. Clearly you aren't interested, and that's cool, but at least be on the same page as the discussion because you seem to not follow the details.

Impulse buy accepted. NM both items show up as sold out.

Found this on these wheels: https://www.roadbikereview.com/threa...review.381553/

LOL! No, that's for the pair.

Irrelevant because both pairs are now sold out.

Something smelled fishy. That's all.
A savvy shop owner would've broke them down & sold the hoops & DT 240's at cost as customer returns rather than the whole thing as a loss. Or given it to an employee & taken the tax benefit as a charitable contribution or counted it as inventory shrinkage at full value or some other means.

There is a such thing as "too cheap."

As a guy in meatspace, the cyberspace end gave red flags of scam. Lord knows what my credit card number would sell for on the Schwarz Market.