View Single Post
Old 10-05-23, 07:11 PM
  #6862  
Nemosengineer 
Senior Member
 
Nemosengineer's Avatar
 
Join Date: Aug 2015
Location: Murrieta Ca.
Posts: 537

Bikes: Teledyne Titan, Bob Jackson Audax Club, Bob Jackson World Tour, AlAn Record Ergal, 3Rensho Katana.

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 623 Times in 245 Posts
As The Pedal Turns... Another episode of the Rossin build, a nice place to sit, lube for a tight post, and I copy my own cockpit.

I received the Campagnolo Nuovo Superleggero seatpost, it weighed in at 304gr. and was in nice condition. After a quick sand and polish I assembled it with the last of my titanium Brooks Swallow saddles. all up weight of the assembly is 649gr.

Untitled by nemosengineer, on Flickr

The Rossin has a very tight seatpost tube even after all the usual prep work, this called for my "secret seatpost sauce" for final installation. Here Is the recipe, 50% anti seize and 50% wheel bearing grease, still a tight fit but no galling on installation.

Untitled by nemosengineer, on Flickr

The Serrota has been a really good fit for me so I transferred all the contact points over with allowances for the 2cm. larger frame, so far so good.

Untitled by nemosengineer, on Flickr

That's all for now: Mike
__________________
Booyah Hubba-Hubba!!!
Nemosengineer is offline  
Likes For Nemosengineer: