Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,141
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4232 Post(s)
Heat induced distortion is pretty common on head tubes. The majority of the weld or braze heat is mostly on one side of the HT. Although a .5mm difference is pretty big. Andy
__________________
AndrewRStewart