Tourist in MSN: Thanks and you have but, you hadn't mentioned the electrical tape. at the time. I don't have the cable problem and had tried the pieces of inner tube once. I have disassembled, cleaned and greased the couplers three times in over 10 years. I am going to try out the electrical or silicone tape. I used friction tape were I zip tied my Click-Stand bracket and my Stompump bracket to the seat tube and seatpost. The zipties alone don't keep them from rotating on the round tubing.You didn't give your thoughts on the rack. With supplied rack hardware the rack wouldn't install. If you look at the low ryder mounts there is a Tubus rear rack accessory bar screwed in then the rack attachment point attached to it.
