Originally Posted by
krecik
Not on the taper, on the bolts.
But previously I used anti-seize copper grease. In order to switch to threadlocker I had to get all the grease out of the hole in the axle taper. I did this with whitespirit, buds and tissues and then went over it with methylated spirit, again using buds and tissues.
E6000 is a glue mostly used for glueing elastic surfaces but it has all sorts of applications. I bought it mostly for patching tubes and it said it can be used as a threadlocker. It dries out to a rubbery, silicony type of material so I can't imagine it causing any permanent bond between the threads.
Kret
OI use it for all kinds of things. but it requires air to cure like any silicone. I remember glued to panels of material together and in weeks the center never dried. but it is not permanent and you can usually peel it off with some work.