Originally Posted by
TimothyH
Yes, really good catch.
The screw is integrated into the derailleur. It just had to be tightened down against the clamp after the derailleur was mounted.
[IM G]https://www.dropbox.com/s/n2vlyno82wauovn/04-06-17.front.derailleur.004.sm.jpg?dl=1[/IMG]
[IM G]https://www.dropbox.com/s/j8hj1ztwa9j8qh3/04-06-17.front.derailleur.005.sm.jpg?dl=1[/IMG]
-Tim-
BTW...In my fussing around with a DA9070 Di2 FD....you're going to probably need to remove the FD in order to seat the e-tube cable. Only way I found to do it was with the E-tube tool poking through the FD cage. So either you crank comes off, or the FD comes off.