View Single Post
Old 08-09-18, 08:33 AM
  #113  
queerpunk
aka mattio
 
queerpunk's Avatar
 
Join Date: May 2005
Posts: 6,586

Bikes: yes

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Liked 58 Times in 35 Posts
Originally Posted by krispenhartung
...need some quick advice here. Tonight I won my second omnium for the week here at Jerry Baker Velodrome and the race director upgrade me to Cat 3. So it looks like I staying and doing the Northwest Regional track championships this weekend. I'm 50 and doing 500m, 2K, international tempo, elimination (international omnium version), scratch, keirin, and points. I'm nervous as hell, but glad to be racing in my age group. :-) I've only done scratch, keirin, and points on this list. My main question is that I need to gear up. I'm on 48:15 now (restricted gearing for Cat 4s) so I need to gear up but I don't have a lot of time to experiment, so I can't take a lot of risks. I'm thinking 52:15 (90 inches), 48:14 (89 inches) or 50:15 (86.8 inches). Unfortunately, I don't have a 49t with me, but I have 16, 15, 14, and 12t cogs. Again, I don't want to risk it too much, but clearly can't be spinning out on my 48:15. Any suggestions? I am inclined toward the mid option, 48:14, and if I have to spin at 140rpm on some sprint laps, I'm good with that. BTW, for the TT/pursuits, I have a different bike for that and different gearing. I'm already set there, based on my Oregon State Masters 500m and 2k.
FYI you are using accurate but non-standard calculation to come up with your gear inches. Most people do 27 * chainring/cog. You're using 26.X, which is the true diameter of the wheel. But most people use 27 as the multiplier, and call a 51x15 a 91.8" gear, a 48/14 a 92.5, etc.

I think low 90s is the right zone for a Cat 3. 51-15 or 48-14.
queerpunk is offline