Thread: Current Project
View Single Post
Old 06-06-19, 10:34 PM
  #6  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times in 2,295 Posts
William- Yes the "skirt" is the steerer extending below the crown.

himespau- Thanks. A single shot doesn't show the planning. I did a couple of practice brazings emulating this joint before this one. Of course there's some filing (after brazing, a lot before...) but mostly of the brass flash that coats the outsides of the crown. I've been doing this part time hobby building thing for a long time and sometimes you get that groove going. Currently my torch work is better then usual. Soon this will pass. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline