Originally Posted by
shaneshane
I tried to adjust b-gap, but in my setup, even I loose the B-Gap screw all the way out, it seems does not get close enough to the biggest cog. (according to SRAM, the top of the derailleur pulley should be 6-15mm below the biggest cog)
do you guys have that problem?
If the chain is too short then then it will pull the RD too far away from the cogs. This was one of the reasons that I put a new chain on my bike and sized it according to SRAM's specs.
With the chain at the proper length it's easy to get the b-gap setting right.
It's a bummer that they sized the chain too short, but it's an easy fix.