Originally Posted by
edwinxu
Hi there, I got a bike with no front brake installed.
I put on a brake lever, connected it via cable and cable housing to the front disc brake.
Problem is, whenever I push down on the forks and press the brakes at the same time, the cable goes slack. (this is due to the cable housing moving)
So my question is, How Do I Secure The Brake Housing to the Frame?
I have tried using zip ties, electrical tape, and a combination of both, to no avail. There is no mount on the fork for a cable guide either.....
Your help would be greatly appreciated!
We need pictures. You can't post pics until you get 10 posts, but you can put a pic on imgur.com and post the link here.