Old 07-04-20, 03:56 PM
verktyg's Avatar
Join Date: Jul 2006
Location: SF Bay Area
Posts: 3,389

Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1990 Bianchi Mondiale, 1988 Colnago Technos, 1985 RalieghUSA Team Pro, 1973 Holdsworth

Mentioned: 161 Post(s)
Tagged: 0 Thread(s)
Quoted: 735 Post(s)
Liked 380 Times in 255 Posts
WTB: Shimano 14T or 15T 2nd Position UniGlide Sprocket FOUND


EDIT: Further research, these were only used on Dura Ace Uniglide freehubs.

I'm looking for a 14T or 15T Shimano DURA ACE 6, 7 or 8 speed "twist tooth" UniGlide 2nd position cassette sprocket, the one that goes behind the screw-on sprocket.

These came in 2 styles: Type 1 with the the splines on the rear, towards the hub and Type 2 with the splines on the outside face.

I need type 1.

Here's a 15T for use with a 7 or 8 speed UNIGLIDE cassette and freehub.

These 7-8 speed UNIGLIDE sprockets are 5mm thick. The 6 speeds are 5.5mm thick but 0.5mm (0.20") isn't going to make that much difference.

Things aren't always what they seem... Don't believe everything you think!

Chas. ;-)

Last edited by verktyg; 08-22-20 at 01:58 AM.
verktyg is offline