Old 06-22-15, 08:44 AM
  #5  
migrantwing
Senior Member
 
migrantwing's Avatar
 
Join Date: Sep 2011
Location: UK
Posts: 495

Bikes: '07 Carrera TDF / 2011 Ghost Race Actinum 5000

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 45 Post(s)
Liked 3 Times in 2 Posts
Originally Posted by FBinNY View Post
Every conventionally laced wheel is built with a multiple, repeating pattern of 4 spokes. 2 crossing on one flange, and a similar pair on the other one spoke hole away in the rim.

The 4 spoke motif is repeated a number of times depending on the number of holes, ie 8x for a 32h wheel. Everything should be uniform and repeat identically, usually with the spokes woven over/under at the last cross.

If your wheel has most, but not all, spokes woven over/under at the last cross, the non woven ones may have been replacements done by a sloppy mechanic.

In any case a whee is a model of repetition and uniformity, so either switch a few spokes if that'll solve the issue, or relace completely.
Thanks, FB! I thought that was possibly the case. They're crappy wheels from a half decent old road bike. Thought I'd mess around with this one rather than my good wheels

Thanks for the info
migrantwing is offline