Originally Posted by
DorkDisk
It's straight forward if the hoses are magically the correct length. If not, you have to cut the lines. Most of the times I can do it without a bleed but sometimes I need a bleed. Hardware might be needed to route the hose and a new olive is needed for the cut hose. If you have integrated shifter/brakes you need to split those.
Thank you!
I think the front hydro brake line will fit without cutting, but the rear will need to be trimmed. It will be run internally through the down tube. (cables are the same dia 5mm) My bike tech has a cable fishing tool to assist in routing. Yes, correct on splitting the shifters, aluminum shifters will be added as the OEM stock all plastic shifter/brake on the Roll is integrated. So when finished both shifters and brakes will be aluminum. No labor charge on the install of any accessories is a plus. Will post up a few pics hopefully this evening.