Originally Posted by
kjaioqhbkqb
[MENTION=20548]I like parts to be serviceable, so I prefer to rebuild here with same parts versus purchasing a disposable bottom bracket.
Originally Posted by
kjaioqhbkqb
@
Bill Kapaun The table helps. Thanks. Are these spindles still being made? What about the adjustable and fixed cups? The brand I had apparently was Nikyo.
....I know this will seem counter intuitive to you, but I will mention it anyway. The day of readily available loose ball bottom bracket parts such as the various spindles and cups you need to accomplish rebuilding with similar parts is long past. It was hard to do even over at the bike co-op, where we had a whole box of old used spindles and miscellaneous cups.
The world of available parts has moved on to sealed unit BB replacements. In your case, do yourself a big favor and when you get that fixed cup out, make certain you measure the width of the BB shell, the length of the spindle, and understand the threading standard you require for the cups. Then order a readily available square taper BB replacement sealed unit (don't get the cheapest one, but you can get good quality in the 20-40 dollar range), repair your bicycle, and move on with riding it.
That's what I would do. In fact, I have done it a number of times. I don't even think anyone is manufacturing loose ball BB spindles or cups any more (but I might be wrong).