Yes, the way I have it mounted is the same as in the photos on the thread you sent me.
I wasn't sure I could get a bolt at the hardware store, because I thought that the hole might be
French-threaded. I am not too familiar with designation M5 or M6, but the shaft length I need is
about 12mm.
The one I was supplied with is about 22mm length.
If the threads can be matched in the U.S., then I should be alright as soon as I get to the
hardware store, but you know how things are right now; if the salesperson is not wearing a mask,
then we could easily jeapordize eachother over a ten-cent item.
Anyway, thanks for your help, Franco. You are always kind. Don't bother turning your store-room
upside down if I can get a bolt with a thin head somewhere else. Toodles.
198