Thread: Strong Wheels
View Single Post
Old 05-14-19, 09:58 AM
  #37  
tallbikeman
Senior Member
 
Join Date: Jun 2013
Location: Yolo County, West Sacramento CA
Posts: 517

Bikes: Modified 26 inch frame Schwinn Varsity with 700c wheels and 10 speed cassette hub. Ryan Vanguard recumbent. 67cm 27"x1 1/4" Schwinn Sports Tourer from the 1980's. 1980's 68cm Nishiki Sebring with 700c aero wheels, 30 speeds, flat bar bicycle.

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 131 Post(s)
Liked 141 Times in 102 Posts
Spoke size

Cyccummute I don't know whether to believe your description or to just believe Vuelta's website when they say a spoke is 4mm. I guess I'll have to go with Vuelta since I did own a pair of these type of wheels and the spokes were bigger than 2.6mm. And no they did not neck down to any 2mm sizes. I worried about a broken spoke and measured mine. I think the spokes for Vuelta are proprietary to their design so spokes might be only available from them. They never caused problems. You might take a good caliper and go find a set of these wheels and start measuring the spoke size for yourself.
tallbikeman is offline