Bike Forums - View Single Post - WTB: Shimano 14T or 15T 2nd Position UniGlide Sprocket

07-04-20, 03:56 PM

#1

verktyg

Join Date: Jul 2006

Location: SF Bay Area

Posts: 4,030

Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro

Mentioned: 207 Post(s)

Tagged: 0 Thread(s)

Quoted: 1036 Post(s)

Likes: 1

Liked 1,238 Times in 654 Posts

WTB: Shimano 14T or 15T 2nd Position UniGlide Sprocket FOUND

FOUND A 14T SPROCKET ON EBAY

EDIT: Further research, these were only used on Dura Ace Uniglide freehubs.

I'm looking for a 14T or 15T Shimano DURA ACE 6, 7 or 8 speed "twist tooth" UniGlide 2nd position cassette sprocket, the one that goes behind the screw-on sprocket.

These came in 2 styles: Type 1 with the the splines on the rear, towards the hub and Type 2 with the splines on the outside face.

I need type 1.

Here's a 15T for use with a 7 or 8 speed UNIGLIDE cassette and freehub.

These 7-8 speed UNIGLIDE sprockets are 5mm thick. The 6 speeds are 5.5mm thick but 0.5mm (0.20") isn't going to make that much difference.

verktyg

__________________
Don't believe everything you think! History is written by those who weren't there....

Chas. ;-)

Last edited by verktyg; 08-22-20 at 01:58 AM.

Reply