Originally Posted by
WhyFi
Yup - I pretty much kept my stack of spacers the same, increasing the drop a cm.
Exactly what I plan to do
.
Originally Posted by
ls01
Dont forget you can control bar height by angle of the stem.
I’ll have 15 mm (perhaps 10, but most likely 15) spacers underneath, to begin with, if I have an upright stem with it, I think they’d chase me with pitchforks from the 41.
Of course bumbling Johnson shut down all British businesses, so I don’t even know if the hands are being wrung in vain
Originally Posted by
bampilot06
Virginia is going into lock down mode at 1159 pm tonight. Only essential businesses will remain open. The liquor store made the list. I find this interesting. Is it open for true alcoholics that may go in withdrawal if alcohol gets harder to come by and could add people going to the hospital, or is open because it is state run and will help generate revenue.
Thoughts?
I was happy to find out liquor shops were considered “essential” in MD as well.
Originally Posted by
datlas
I got my stubborn brake hood on yesterday with a little help from some hand sanitizer.
Today, if I have the energy, I will wrap the bars and call the project a wrap.
i see what you did there...
Originally Posted by
abshipp
Our sweet calico kitty was right by my side from at least 3:30 this morning until I had to get up at 5:30
She is a very reliable cuddler.
So is our alarm calico. Always wants to be petted around 3:30am.