View Single Post
Old 07-14-19, 05:06 PM
  #16  
masi61
Senior Member
 
masi61's Avatar
 
Join Date: Oct 2005
Location: SW Ohio
Posts: 2,219

Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Liked 22 Times in 20 Posts
[QUOTE=MyTi;21026685]

Yes itís possible, I got the quote to do it, itís like $1100 for a full retrofit including rear dropout spacing to 135mm..This is from a reputable place that most people recommend. The litespeed vortex rides greatÖitís as optimized as it can be as far as braking...good pads, toe in, etc. Disc brakes would perform better since I ride in the fog a lot.

As for the Moto Iím sure thatís fine for most, but Iíve tested that frame actually. Any real power on that bike and there is some ridiculous flex near the BB area. I literally felt like I was yoyoing when pedaling on that thing. You canít really compare a 6-4 Ti litespeed vortex with oversized diamond shaped tubing and bladed rear triangle to some run of the mill motobecane ti frame. Iíd say newer litespeed and Lynskey 6-4 ti frames are good but most run over $3k.



That's a big expense to hot rod your Litespeed Vortex. The stiffer diamond shaped tubing and bladed rear triangle do sound nice. I'm building a Wittson Illuminati titanium disc bike. This Lithuanian builder is less known in the US but you might check him out.

I have procrastinated completing this build but apparently it is time. I have ridden about 1400 miles this year on my titanium bike, a Veritas with rim brakes and Dura Ace 7800 components. The ride is amazing compared with my old friend, my aluminum Flyte SRS-3 (which I have ridded over 10x as many miles on). The innate shock absorption of the titanium, combined with the oversized tubing of my Veritas (Ohio made) frame, added to my 28 x 28 hole Dura Ace 7700/Mavic Open Pro 2 cross wheels with lightweight DT Swiss butted spokes (not the standard butted ones) along with Vittoria latex inner tubes run at medium pressures (85 front, 89 psi rear) provide stiffness but with a non-jarring ride that I accidentally discovered. The bike I bought used and paid $675 for it. It is fantastic. The 7800 dual pivot calipers can handle rain and fog quite well.
masi61 is offline