Bike Forums - View Single Post - Columbus SL Frame-Loose rear dropout
View Single Post
Old 05-18-20, 08:26 PM
  #12  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 13,597

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2430 Post(s)
Liked 490 Times in 380 Posts
Agreed that the right flux for the filler is a must. Getting both from the same source will make this a no brainer. Get much more then you thing is needed as you'll want to practice a bunch before burning any flux on the frame

Tiny points of body filler is no big deal. Lots and when it's thick is much more an indicator.

Don't know what you mean by "pool acid". My experience with chemical cleaning prior to brazing never proved successful. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline