View Single Post
Old 03-28-20, 09:36 AM
  #1  
irish pat
Senior Member
 
Join Date: Nov 2005
Location: new paltz, ny
Posts: 637

Bikes: kestrel talon, Ultegra group,AC sprint 350 wheelset, Trek alpha sl 2500, 105 group,Mavic ssl sl wheelset, ridley crossbow, 105 rear der, single front, Redline Conquest, tiagra group, Fuji single speed, Mongoose Mtn bike,

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Di2 rear mech not adjusting.

I have a specialized Tarmac disc with Di2. It was all working perfect until last week, then it started getting a little noisy in the upper/easy gears. I went to adjust it this morning. In the smaller chainring at the front, it won't shift into the upper cog (28t). it wont stay in the third cog from the top either. It shifts onto the 11, at the bottom of the cassette, which it's not supposed to do. Ive adjusted the upper and lower limit screws and tried the instructions online to adjust it. the only way I am able to adjust it, is to go down, so i can stop it before the second last cog at the back, and then when it is at the smallest cog, it gives 2 shifts at the bottom, before it starts moving up the cassette, and then it stops on the 9th cog instead of all the way up to the 11th.
The chain is almost new, the bike has only about 2000km on it.
I've also tried the crash reset on it, I am wondering if there is a full reset anywhere? I had di2 on my other bike and never had an issue with it, any help is appreciated, thanks.
irish pat is offline