Originally Posted by
pastorbobnlnh
The New Winner can be a royal PITA when it comes to service. Sometimes they open right up, other times they defy all attempts, even after using lots of penetrating oil or heat. A hammer and punch can also be used but be aware that the notch edges are easily damaged.
When and if you do manage to loosen the lock rings, take care to do so over a bowl or towel which will catch the loose ball bearings. There was a good reason why this design never caught on at Suntour and was never copied by any other freewheel manufacturer.
Best of luck and let us know how you do.
I've dismantled and successfully overhauled several Winner and New Winner freewheels, with no specialized tools ( if you don't count universal spanner wrenches). A labour of love for sure. Judicious use of heat is your friend for getting them apart in the first place.
I like that as the attending mechanic, you have full control over the bearing preload, without resorting to unobtanium shims.
Originally Posted by
madpogue
That lock ring is reverse thread, correct?
I can never remember. Drives me crazy.