Hi, yes quite happy with the end result. I sanded the frame down and filled a small dint on the rear chain stay. Then prime with rustoleum white primer. Followed that up with light sand 2000 grit wet. I gave it a coat of rusto white semi gloss then three coats of rusto pearl mist. I never used that product before but really wanted to try and get the original pearl colour back. Impressed at how this went on. Just make sure you let things cure sufficiently before adding clear or the paint may wrinkle(speaking from experience) patience is one of my strong points. Applied three light coats of clear as it runs really easy then wet light sand once cured 2000 grit. I’m always learning as I go as well. It is so rewarding to do it yourself but yes it can be frustrating at times.
Last edited by victorm; 07-09-20 at 07:35 AM.