The NDS crank is closer to the BB shell and the chainstay. However, I believe the clearance is wide enough to not be an issue. At the BB shell, the clearance is 6.3mm. At the pedal end of the NDS crank arm, the clearance is 4.75mm to the chainstay. This morning, I installed the new brake cables along with the fork mount cable stop. I did not mount the Zonda wheelset. I am going to leave them on my Airborne Zeppelin. It is looking like I am not going to get in shakedown ride today.The wind is blowing 17 to 22 mph and gusting to close to 30 mph. It is also raining and it looks like that is going to get heavier in the next hour or so. Maybe a quick lap or two around my neighborhood.