Originally Posted by
Doug64
I disagree with not taking the time to grease the bearings. LX hubs are well sealed, but they are not impervious to water. I run LX and XT hubs on our touring bikes, and lube them before starting a tour, which has been annually for the last 15 years. At least do the lubrication work before you take the bike on a tour. Most of my tours are multi-month tours, and I don't want to spend time fixing things in the middle of a tour, when trouble can be avoided by some simple pre-trip preventative maintenance.
You do not know anything about the bike you just bought. The previous owner could have used a pressure washer to clean the bike before the sale. I would tear bike completely down and clean, check and lube everything. Then you know what you have. But that is just me.
Headset bearings can cause problems.
[[img]https://live.staticflickr.com/65535/49807693746_52d8b22328_b.jpg
+ 1 on this. An old bike like this needs to be overhauled and consumables replaced.