Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
https://framebuildersupply.com/collections/braze-ons
This is but one supplier who offers rack eyes/tabs. I doubt that you'll find anything that comes close from a hardware store or industrial supplier. If you're going to make a lot of racks then designing your own and getting a few hundred water jetted makes economic sense. If you need a few handfuls then buying something like I linked to makes sense. If you're making just one or two racks it's easy to cut/file/grind a few out free hand. Andy
__________________
AndrewRStewart