Originally Posted by
Fentuz
In my limited experience, the adaptor needs to be able to be fitted upside down as I did (put the braze peg on the other side) whish you can do wit this new design however, the cable stop is still an issue. ideally, the cable stop would be linked to the peg so that it is totally universal.
On Brompton I am using the adapter for Birdy, with the band above the derailleur, i.e. effectively inverted relative to other offerings, see below. However this one is expensive. I had to use an asymmetric shim under the derailleur mounting bolt to get the angle right. As far as inverting other mounts is concerned, I tried it but with no success. In another thread
tomtomtom123 showed a 3D printed hanger portion of the adapter - this obviously opens up a multitude of opportunities.
