Seat: Has been glued in certain places as opposed to stitching. The 122yr old leather objected to that. It is installed and I’m in the process of adjusting.
Wheels and spokes: I implemented a x2 using 14ga spokes from Wheel Builders supply, great people there. Nipples were a bugger. The wood rims need 19mm (3/4”) which are not easy to find. I settled on 16mm, measured accordingly and began the relace. Spokes took a slight angle to them as they were torqued. The angle of holes and the thickness of the wood was a challenge. The 16mm spokes are trued from the topside, tire off. It is what it is. This is a parade bike, very occasional rider.
Yes, the back valve stem is off center. I’m cool with that. Here is a pic of how I finished the schrader to presta fit: