Originally Posted by
chico1st
Hi there quick question about removing this bottom bracket.
Someone gave me an old super cycle which is in perfect shape except it has a loose cartridge bottom bracket (I have the cranks off and the spindles flop everywhere).
I can't get the cups off and I just wanted to check some stuff before I destroy my tools:
- Everything on the bike is shimano so I assume the non-drive side cup needs to be turned clockwise to loosen it, drive side is counter clockwise.
- I need to use a bottom bracket tool AND a 20spline tool (I have a BBT32) to remove the drive side pictured below
- The splines on my bbt32 don't engage that deep (maybe 1mm). Is that normal?
- The BBT32 kind of pops out when I push really hard but there isn't a good way to force it to stay inside the teeth
- tightening or replacing the cartridge should solve the issue.
Images
Are you sure?
Take off the lock ring first.
https://www.sheldonbrown.com/gloss_bo-z.html#bottom