Originally Posted by
Winfried
Unless it's further back in the thread, you posted pics but no link.
https://www.bikeforums.net/showpost....&postcount=168
Googling for "BromptonINrio instructables" returned nothing.
Also, is a 3D-pinted design
solid? I wouldn't want to have it break on me while travelling.
Hey my friend,
to use brompton block on dahon lugs i tryed 2 methods and bolth has proven solid:
first is to use a regular brompton front carrier blocks and enlarge the holes to fit dahon bolt spacing.
after, you need to fill down about 7mm of dahon lug welded in bike.
in the end the two bolts need to go in the proper angle and the carrier block need to fully embrace the dahon lug.
second is to buy and adapter:
Here you can find many in all materials https://www.shapeways.com/product/QLHYDKUBE/brompton-carrier-adapter-for-tern-or-dahon-folders
The last subject is that if you can print either your carrier block or your adapter block...and you can pri t bolth.