Old 07-29-19, 09:38 AM
  #5  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 17,998

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4171 Post(s)
Liked 3,789 Times in 2,269 Posts
I think the second scenario is the more likely. When screwing around with the wheel reinstall and through axle install the der likely got pushed on. Which will want to push the cable back up the casing and possibly all the way to the lever. When the pushed out of it's seat cable head gets trapped between the cable spool/pulley and the lever body insides.

If this is right and if the lever wasn't then down shifted with force the repositioning of the free cable head is not too hard. If the lever was jam shifted and the cable head is wedged up tight, good luck. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline