Originally Posted by
cudak888
I used the @Drillium20%Dude method: Paint, then hit the raised areas with a rag and Goof Off. Works perfectly.
It's flat black - not even satin. I roughly masked off the arm, sprayed it black, and used the method I mention above to remove the excess.
I'd do it on Campagnolo flutes, but not these. They're not defined enough to look good, IMO (and I don't think I'm good enough at it to get the edge defined below the beveled section).
-Kurt
that is why the Leroy pen- only for the flat bottom area- the way the depression terminates on the Shimano crank you are correct, not enough definition.