Originally Posted by
verktyg
Kurt, slightly different topic.
I replaced the reamer/cutter below the facing cutter on my VAR 32 with a brass bushing. Took about 10 minutes to make on a lathe.
Problem is the cutter is designed to cut the head tube to 30.x mm diameter on a newly built frame.
When refacing the head tube it frequently (most of the time) enlarges the bores in the head tube. The brass bushing eliminates the problem.
Not a different topic at all - I've already noted this issue and was going to put the 1" reamer on the tool to clear the 1-1/8" headtube I have to face - but I do not have a solution for 1" yet. Any chance I can *ahem*
influence you to make another? Pretty please?
Do let me know...
-Kurt