3D Printed Accessories / Mounts
#376
Ride it like you stole it
Thread Starter
ENVE Wahoo Replacement Insert
All the people that have the ENVE mount and want to switch it from Garmin to Wahoo, this model will do just that. Uses the existing hardware.
Enve Wahoo replacement Insert v2.jpg
Wahoo ENVE Insert
Enve Wahoo replacement Insert v2.jpg
Wahoo ENVE Insert
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#377
Ride it like you stole it
Thread Starter
To quote Bare Naked Ladies, "If I had a Million Dollars..." I would give some serious consideration to the newly announced FUSE 1 from Formlabs.
https://formlabs.com/3d-printers/fus...ntent=main-nav
Way to much money for me $10,000 for the printer and another $10,000 for the powder recovery system. It would give you basically a smaller version of the setup that commercial 3D printers use for SLS (Selective Laser Sintering). The TESTED YouTube channel went to Formlabs to look at this printer and Formlabs said that one of their engineers printed a pedal and has used it to commute to work for the past year. That is quite impressive! Once these printers come down (cloned by some Chinese manufacturers) I might have to start saving my pennies. Right now all my pennies are spent on tires (why are tubulars so damn expensive?).
https://formlabs.com/3d-printers/fus...ntent=main-nav
Way to much money for me $10,000 for the printer and another $10,000 for the powder recovery system. It would give you basically a smaller version of the setup that commercial 3D printers use for SLS (Selective Laser Sintering). The TESTED YouTube channel went to Formlabs to look at this printer and Formlabs said that one of their engineers printed a pedal and has used it to commute to work for the past year. That is quite impressive! Once these printers come down (cloned by some Chinese manufacturers) I might have to start saving my pennies. Right now all my pennies are spent on tires (why are tubulars so damn expensive?).
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#378
Full Member
i have a cygolite streak 310 and was wondering if anyone made or can make a mount for the light to mount to a go pro mount? i have a k edge garmin / go pro mount for my garmin 520 and would love to hang the light on the go pro mount when night riding.
thanks
rob
thanks
rob
#379
Junior Member
Join Date: Jun 2007
Location: Michigan's UP
Posts: 108
Likes: 0
Liked 0 Times
in
0 Posts
Helmet Mount Kits - Cygolite Online Spare Parts
#380
Newbie
I don't know if the printing quality is up to FUSE 1, but it is half the price and open source Sintratec Kit at 5000EUR . Still pricey though!
(sorry I am not allowed to post a link yet)
(sorry I am not allowed to post a link yet)
Last edited by cyclostam; 07-12-17 at 05:12 AM.
#381
The HLMT-DCV12 helmet mount uses a standard GoPro mount and might be your best option.
Helmet Mount Kits - Cygolite Online Spare Parts
Helmet Mount Kits - Cygolite Online Spare Parts
#382
Junior Member
Join Date: Jun 2007
Location: Michigan's UP
Posts: 108
Likes: 0
Liked 0 Times
in
0 Posts
Good info though, thanks.
#383
Full Member
The HLMT-DCV12 helmet mount uses a standard GoPro mount and might be your best option.
Helmet Mount Kits - Cygolite Online Spare Parts
Helmet Mount Kits - Cygolite Online Spare Parts
perfect thanks for the heads up, works great
rob
#384
Sorry I took so long to follow up. Mine was definitely an M4. Below is an image of the Cygo Lite thumbscrew next to a GoPro thumbscrew...
Last edited by edthesped; 11-04-17 at 03:52 PM.
#385
Ride it like you stole it
Thread Starter
[MENTION=465933]Michaeldab420[/MENTION] Do you have some personal experience that leads you to this conclusion?
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#386
Ride it like you stole it
Thread Starter
Have been really busy playing with my new printer, but also got some time in to fulfill a few requests.
First, many thanks to Wahoo Fitness for having the foresight to place their mounts in a public repository. To 3D print them there is some modifications to their models but since I know what is printable it wasn't too hard to make those modifications. I took their aero BOLT mount and chopped off the handlebar mount and added a mount for Bontrager Blendr and BMC ICStem.
If you are using the ENVE mount I have two things for that too. The first one is an interface for Di2 that will mount onto the bottom of the ENVE mount. The second is a Wahoo Mount for the top of the ENVE mount.
There are also a couple of rear mounts for Shimano Di2 Junction A boxes.
First, many thanks to Wahoo Fitness for having the foresight to place their mounts in a public repository. To 3D print them there is some modifications to their models but since I know what is printable it wasn't too hard to make those modifications. I took their aero BOLT mount and chopped off the handlebar mount and added a mount for Bontrager Blendr and BMC ICStem.
If you are using the ENVE mount I have two things for that too. The first one is an interface for Di2 that will mount onto the bottom of the ENVE mount. The second is a Wahoo Mount for the top of the ENVE mount.
There are also a couple of rear mounts for Shimano Di2 Junction A boxes.
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#387
Ride it like you stole it
Thread Starter
Di2 Saddle Rail Mount
So I was asked to do a saddle rail mount for the Di2 Jucntion A when I got this picture I never expected it to be mounted tin this direction.
CloakandDagger-50.jpg
CloakandDagger-53.jpg
CloakandDagger-50.jpg
CloakandDagger-53.jpg
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#388
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,757
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Trek Marlin 6, Scott Sub 35, Kona Rove, Trek Verve+2
Liked 819 Times
in
415 Posts
Thats a bad spot for anything electrical on a tri bike. Those triathletes don't stop when nature calls.
#389
Ride it like you stole it
Thread Starter
Honestly, I modeled it to go on the back side behind the saddle clamp, I was surprised when I saw the picture.
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#391
Ride it like you stole it
Thread Starter
[MENTION=141062]JonnyHK[/MENTION] they are located here
https://github.com/wahoofitness/ELEMNT-Mount
I am seeing Wahoo Fitness as a very forward thinking company. This alone may make my next bike computer a device from Wahoo Fitness once my Edge 810 kick the bucket. Just note that there are some thin wall features that would be difficult to 3D print. They specify that these models were built for injection molding with a mix of 90% nylon / 10% glass fiber.
https://github.com/wahoofitness/ELEMNT-Mount
I am seeing Wahoo Fitness as a very forward thinking company. This alone may make my next bike computer a device from Wahoo Fitness once my Edge 810 kick the bucket. Just note that there are some thin wall features that would be difficult to 3D print. They specify that these models were built for injection molding with a mix of 90% nylon / 10% glass fiber.
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#392
Senior Member
Join Date: Sep 2008
Location: London
Posts: 2,420
Bikes: Baum Romano, Brompton S2, Homemade Bamboo!
Liked 204 Times
in
129 Posts
[MENTION=141062]JonnyHK[/MENTION] they are located here
https://github.com/wahoofitness/ELEMNT-Mount
I am seeing Wahoo Fitness as a very forward thinking company. This alone may make my next bike computer a device from Wahoo Fitness once my Edge 810 kick the bucket. Just note that there are some thin wall features that would be difficult to 3D print. They specify that these models were built for injection molding with a mix of 90% nylon / 10% glass fiber.
https://github.com/wahoofitness/ELEMNT-Mount
I am seeing Wahoo Fitness as a very forward thinking company. This alone may make my next bike computer a device from Wahoo Fitness once my Edge 810 kick the bucket. Just note that there are some thin wall features that would be difficult to 3D print. They specify that these models were built for injection molding with a mix of 90% nylon / 10% glass fiber.
My Edge 500 is on it's last legs and I was also considering the Wahoo units.
I'll look closely at those designs. At the very least I'd want to replace the mount disks on my K-edge mounts.
#393
Ride it like you stole it
Thread Starter
It's not too bad, just be aware there are some sections that are thinner than 1 mm.
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#394
Newbie
Join Date: Aug 2017
Posts: 2
Likes: 0
Liked 0 Times
in
0 Posts
Madone 9 Garmin mount
I need 6 pcs. Pls email me here to deal. Thks
#395
Ride it like you stole it
Thread Starter
This mount is designed specifically for the Bontrager Blendr mount and the Garmin Edge 1000.
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#397
Ride it like you stole it
Thread Starter
What's an "in mount"?
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
#400
Ride it like you stole it
Thread Starter
[MENTION=469614]Zackkattack[/MENTION], what exactly are you looking for?
__________________
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways
"Never use your face as a brake pad" - Jake Watson
The Reloutionaries @ Shapeways