does 3x require more shifting than 2x?
#201
Junior Member
IMHO it all depends on the rider, I know guys who hardly shift at all when they ride, and others that are shifting constantly. Maybe it has something to do with individual fitness level, or maybe it is just habitual, or maybe a bit of both.
#202
Senior Member
Join Date: Jul 2009
Posts: 6,129
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 4058 Post(s)
Liked 7,658 Times
in
3,072 Posts
#204
Senior Member
Join Date: May 2021
Posts: 8,859
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4630 Post(s)
Liked 5,166 Times
in
3,194 Posts
I can understand the use of these 10 and 11 speed cassettes with Big jumps between gears on a mountain bike, But I would not want one for the road.
Even the 7 speed Freewheel on my comfort bike has closer steps. An 11- 42 10 speed has jumps from 15 - 18 - 21T. My 14 -28T 7 speed has steps of 14 -16 -18 -20 - 22T. Combined with a 28/38/ 48T chainring I have a gear for every scenario I'm likely to encounter. And 90% of the time I need only shift the back.
It's fine to have a big range, but what good is it having all those gears on the road if you can't find the right one.
Even the 7 speed Freewheel on my comfort bike has closer steps. An 11- 42 10 speed has jumps from 15 - 18 - 21T. My 14 -28T 7 speed has steps of 14 -16 -18 -20 - 22T. Combined with a 28/38/ 48T chainring I have a gear for every scenario I'm likely to encounter. And 90% of the time I need only shift the back.
It's fine to have a big range, but what good is it having all those gears on the road if you can't find the right one.
My 12-speed road bike cassette has:-
10-11-12-13-14-15-17-19-21-24-28-33
With a 48/35 crankset it has plenty of gear options without needing a third ring (which is not an option anyway).
My mountain bike has a 12-speed 10-50 cassette with obviously wider steps, but I don’t use it for road riding.
Last edited by PeteHski; 09-25-23 at 10:35 AM.
#205
Senior Member
Why are you talking about mountain bike cassettes for road use?
My 12-speed road bike cassette has:-
10-11-12-13-14-15-17-19-21-24-28-33
With a 48/35 crankset it has plenty of gear options without needing a third ring (which is not an option anyway).
My mountain bike has a 12-speed 10-50 cassette with obviously wider steps, but I don’t use it for road riding.
My 12-speed road bike cassette has:-
10-11-12-13-14-15-17-19-21-24-28-33
With a 48/35 crankset it has plenty of gear options without needing a third ring (which is not an option anyway).
My mountain bike has a 12-speed 10-50 cassette with obviously wider steps, but I don’t use it for road riding.
It looks like you've got a perfect gear for every scenario. I find my 14 - 16T step to be less the ideal, but it's OK for my recreational rides. I like bigger steps for my lower gears though, like you're bike has.
Last edited by xroadcharlie; 09-25-23 at 10:45 AM.
#206
Senior Member
Join Date: May 2021
Posts: 8,859
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4630 Post(s)
Liked 5,166 Times
in
3,194 Posts
Quite correct. My bad. I was thinking the title was 1x vs 3x.
It looks like you've got a perfect gear for every scenario. I find my 14 - 16T step to be less the ideal, but it's OK for my recreational rides. I like bigger steps for my lower gears though, like you're bike has.
It looks like you've got a perfect gear for every scenario. I find my 14 - 16T step to be less the ideal, but it's OK for my recreational rides. I like bigger steps for my lower gears though, like you're bike has.
Likes For PeteHski:
#207
Senior Member
Join Date: Dec 2004
Location: Middle of da Mitten
Posts: 12,490
Bikes: Trek 7500, RANS V-Rex, Optima Baron, Velokraft NoCom, M-5 Carbon Highracer, Catrike Speed
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1516 Post(s)
Liked 736 Times
in
457 Posts
I don't think that's what wheelreason meant.
Same here. Adding a granny ring just gives me some bail-out gears, it doesn't affect my normal shifting.
Same here. Adding a granny ring just gives me some bail-out gears, it doesn't affect my normal shifting.
Likes For BlazingPedals:
#209
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,998
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2402 Post(s)
Liked 2,962 Times
in
1,618 Posts
I find the more impact on number of shifts I do is not as much double or triple but on
1) do i have integrated shifters? if so then I shift a lot more than I do with downtube friction or indexed
2) how close are my gears? I tend to shift more with tightly spaced gears than with more broadly spaced vintage gearing
and of course terrain makes a huge difference flat means not much shifting, rolling hills means more shifting
1) do i have integrated shifters? if so then I shift a lot more than I do with downtube friction or indexed
2) how close are my gears? I tend to shift more with tightly spaced gears than with more broadly spaced vintage gearing
and of course terrain makes a huge difference flat means not much shifting, rolling hills means more shifting
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
#210
Full Member
Join Date: Jul 2013
Location: Southern California
Posts: 498
Bikes: Historical: Schwinn Speedster; Schwinn Collegiate; 1981 Ross Gran Tour; 1981 Dawes Atlantis; 1991 Specialized Rockhopper. Current: 1987 Ritchey Ultra; 1987 Centurion Ironman Dave Scott Master; 1992 Specialized Stumpjumper FS
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 214 Post(s)
Liked 181 Times
in
114 Posts
Likes For Chinghis:
#211
Senior Member
Join Date: Mar 2023
Location: NorCal
Posts: 644
Bikes: Santa Cruz Blur 4 TR, Canyon Endurace cf sl, Canyon Ultimate cf slx, Canyon Strive enduro, Canyon Grizl sl8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 1,159 Times
in
440 Posts
On my road and gravel bikes, I'm a fan of 2x11. The road bike is a compact with a 11-34 cassette, the compact is the perfect gearing for me...the small ring for extended climbing, and the big ring is perfect for very shallow grades and the flats.
When it comes to MTBing, I'm all-in on the 1x drivetrains. I do not miss my 3x bikes with 26" wheels. My last 26'er was a 120mm FS trail bike with Sram 3x10...more gear combinations than was necessary IMO. I first got into XC racing on that bike and I hated that gearing set up in racing scenarios. I got my 100mm FS 29'er XC bike with a 1x11 not long after. The 1x11 doesn't quite have the low-end of the 3x, but that's a moot point in a racing scenario...a 1x12 solves this.
My enduro bike is a 160mm travel bike with 1x12. The low gear is definitely a granny gear. It might not have a ton of top end, but if I'm spinning out that bike, I'm on the wrong bike for that ride. On technical singletrack, it's a benefit to only have one shifter to run IMO. Shifting is quick and I can easily get into the right gear as I rapidly approach trail obstacles/features. Another benefit is that it saves room on the left side of the bars for other stuff. On my enduro bike, I've got my dropper-post lever where a front shifter would reside on older bikes. Also have a lever there that can change the rear-suspension geometry on the fly.
When it comes to MTBing, I'm all-in on the 1x drivetrains. I do not miss my 3x bikes with 26" wheels. My last 26'er was a 120mm FS trail bike with Sram 3x10...more gear combinations than was necessary IMO. I first got into XC racing on that bike and I hated that gearing set up in racing scenarios. I got my 100mm FS 29'er XC bike with a 1x11 not long after. The 1x11 doesn't quite have the low-end of the 3x, but that's a moot point in a racing scenario...a 1x12 solves this.
My enduro bike is a 160mm travel bike with 1x12. The low gear is definitely a granny gear. It might not have a ton of top end, but if I'm spinning out that bike, I'm on the wrong bike for that ride. On technical singletrack, it's a benefit to only have one shifter to run IMO. Shifting is quick and I can easily get into the right gear as I rapidly approach trail obstacles/features. Another benefit is that it saves room on the left side of the bars for other stuff. On my enduro bike, I've got my dropper-post lever where a front shifter would reside on older bikes. Also have a lever there that can change the rear-suspension geometry on the fly.
Likes For Sierra_rider:
#213
Senior Member
Join Date: Jan 2010
Posts: 39,661
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18593 Post(s)
Liked 16,085 Times
in
7,549 Posts