Fred Smedley

I need/want;
a Shimano Ultegra LH shifter 9sp st-6501 release mechanism frame (black metal piece shown) or a dead shifter to salvage one. Shimano Ultegra STI shifter assembly | DSC_0079
WTB SST saddle
Tricolor LH triple brifter
27.2 X 400 black MTB Seatpost.
Will consider other trades ?


Have lots to trade Road or MTB Frames/forks/ parts.....
Including 93 MB-3 frame/fork Logic Supertubing 46CM
Reg Harris Lambert complete probably a 55cm, need to measure
Miyata Quickcross 54CM frame /Fork Al maintubes, Crmo fork /stays , VGC
Elevated stay Redline 55 will fit 650B or really large 26 tires.
GT Avalanche Tange Prestige frame 20"
Trek 930 frame 1998 (I think) True Temper OXll 19" I think
Windsor lugged frame - with a chromed/paint fork that will fit a small headtube lots of rake.
GT high end 3D fork , will fit a 20" frame or smaller , now long 1 1/8 threadless. These came on Psyclones and Zaskars.
Early lugged Trek high end MTB frame/fork , was a XT bike. Small frameset , cool fork!
Suntour XCpro greaseguard front hub NOS
Suntour XCpro with cassette, R wheel, complete wheel, Mavic 230 or 231? butted spokes.
Dahon folding bike.
XT thumbies
Shimano Broken Arrow RD , FD, downtube friction shifters. Center mount. (Miyata)
Two RM 20 wheelsets, one solid axle with minimal miles(excellent rim condition) and another with a nice QR hubset Could piece together a great vintage wheelset for your ?
NOS F 27" wheel Mallard 700, DT and Matrix titant dark anozided rim
NOS 27" wheel Mallard 500 DT and Araya rim , silver

3speedslow

Not really, I just laid into a nice pair complete. They are out there. Keep looking !

Bikes and Jeeps

For trade: Race Face Ride threadless stem.

1 1/8, 90 mm, +/- 6 degree. Bar clamp 31.8

ISO: Shorter, taller black stem with a bar clamp of 25.4.
Similar to the shiny silver one pictured.


TRADED

cyclotoine

I'd actually call that a 100.

Bikes and Jeeps

The picture with the tape makes it look that way, but it says 90 on it, and I measure 90 C-C.

jeirvine 

ISO Campy (or Miche Campy compatible) 8sp 14t first position cog. I have a 12t or a 13t I could trade. Marked "14A" is preferable, but 14B is fine too. Thanks,
-John

otg 

For trade: Brooks Professional pre softened saddle in nice shape, just doesn't work for me.
Looking for: Brooks Flyer in the same shape.
EDIT: TRADED

RobbieTunes

PM sent, I have what you need.

harrysachz

trading; a)1998 Gary Fisher Kaitai 19", manitou fork, can trade complete bike or frame fork
b) 2012 dodici gara 55cm green frame and fork only
c) 56cm schwinn super sport frame and fork with matching ritchey stem, bars, headset seatpost reynolds 853

iso: 54-56cm (18-20") STEEL ONLY (maybe titanium)
touring bikes, 1980s earlys 90s mtn bikes, cross bikes, road bikes, bmx
brands of particular interest: bridgestone and fat city cycles

SimplySycles1

I have a Rear Dura Ace 7400 rear quick release, pretty good shape. Need a Front of same.
I can't PM.........wooba.flores@gmail.com

cyclotoine

ISO: - 170mm triple crank, prefer 110 bcd but would consider 94
- XTR M900 rear quick release

Have:
175 mm Deore Cranks MT60, no rings
and
170mm sugino GT double (110 bcd) with 40/52t drilled rings...

Other stuff, lots of small parts. other quick releases...

What have you got?

Henry III

ISO 1" threadless black Chris King headset.

crank_addict

I likey! Now on my ISO list

RobbieTunes

RobbieTunes's albums - Imgur

Have:

FSA SLK carbon seat post, 260mm to bottom of cradle, 31.6, zero setback, (190 g)
Chinese aero seatpost, alloy, 27.2, pretty and fairly heavy

105 brake levers, aero, with new black hoods. VGC
105 brake levers, aero, with nice white hoods. VGC

Kajita BB, 120mm spindle by 68mm BB, ball bearing, good condition
Shimano BB - E525, cartridge, never mounted, 113mm spindle by 73mm BB, Octalink
Shimano BB - UN52, cartridge, never mounted, 110mm x 68mm BB, square taper (English)
Shimano BB - UN55, cartridge, never mounted, 113 mm x 70mm BB, square taper (Italian)
Shimano BB - Dura Ace 7400, ball bearing, VGC, 113 mm x 70mm BB, square taper (Italian)

Shimano 6400-series hubset, 8/9/10 rear, 32h laced to Matrix ISO-II C tubular rims in great shape, or unlaced if you wish

Shimano 5500 FD, braze-on double FD, missing short screw at back of cage
Shimano 5603 FD, 31.8 clamp, triple FD, good condition

Shimano 7402 RD, short cage, excellent condition

Shimano 6400/7700 bar end shifters (DA ONLY) and they shift 8-sp or 9-sp DA RD's only.

Cinelli no-groove 66-42 bars, avg condition, a few scratches on the sleeve, 26.4
Cinelli black 70mm stem, 26.4, minor nicks, black stem bolt forsome reason

Double-groove Japanese bars, 40cm, "T" on each side of the sleeve, very similar to Nitto B115, 25.4

Forte Pro stem, 90mm, 1 and 1/8" to 26.0 clamp, like new in box
3TTT Forgie stem, 90mm, 1 and 1/8" to 26.0 clamp, well used

27.2 seat post holder for 2 CO2 cartridges. No idea where it came from

NIB Giro Ionos (Livestrong Edition) helmet, size S, still has tags on it.

and yes, I'd put the whole shebang into a box and ship for the right trade...

ISO:
Campagnolo Eurus wheelset, 10-sp capable and black.
Thomson Elite seatpost, 27.2 zero setback, in black.
Thomson Elite stem, 100mm, in black.
700x25 Continental GP4000S II tires
DA 7700 braze-on FD (2)

Negotiations in PM

seedsbelize 

Spiritual bliss perhaps?

RobbieTunes

That would do.

3speed

Robbie, any chance you'd wanna trade those 9sp bar-ends for a set of the 8sp ones from a tri-color group(should work with everything Shimano indexed)?

Otherwise, to everyone, I have a set of 8sp Shimano bar-ends. I'm looking to trade for a set of Shimano compatible 9 or 10sp.

RobbieTunes

Not sure what I'd do with a set of 8-sp bar ends, but if someone out there wants yours, and has something cool to send me, we can do a menage a trois.

Also, you understand those 7400/7700 bar ends only work with DA 7400/7700 RD's, right? At least, according to the label on the R shifter.

3speed

I was willing to take a chance and see if they'd work with other 9sp stuff. From what I've read, all 9sp Shimano stuff "should' be compatible.

RobbieTunes

Well, then, see if anyone wants yours, and what they have to trade. I'm open to suggestions.

BColeKid

I think this is the right place to put this offer. I have $229 in store credit from Timbukt2. I don't think this is the place for a debate about the merits of the company.

I am looking for a vintage touring frame between 58cm and 60cm, with the braze-on works. Maybe this is an unreasonable proposal? I don't know. I'd be open to considerations for the right frame.

noglider 

Looking for a 32h black rim to match a Mavic MA3 rim. Doesn't have to be an MA3, though.

I have all kinds of rims and tires and also other stuff.

buldogge

ISO:
Campy Chorus Skeleton front brake caliper, silver…or…same, but the pair, in black.
Fizik Aliante saddle
Specialized Romin Evo saddle, 143/155, black

Have:
Brooks B17 Imperial, black.
Regal Girardi, white.
Campy silver Veloce skeletons, with CE/CH pad holders.
Chorus DP calipers, silver.

TIA
-Mark in St. Louis

seedsbelize 

Pm sent

RobbieTunes

You may want to edit your post to eliminate offers of cash; verboten on this thread.

However, I think the store credit thing is a darn good trade item. Wish I had a frameset.

Welcome to the Forum.