Sugino (Maxy)
#51
Senior Member
Join Date: Apr 2020
Posts: 331
Bikes: '68 Masi Special road, Grail bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 70 Times
in
58 Posts
I recall about 10 types of "Maxy" cranks, all of them swaged. they are the only swaged cranks that I've
seen that are stamped "forged". the reason that Sugino cranks are measured 171mm is that it equals
6 3/4 inches (165mm =6 1/2) keeping in line with old British cottered spindles.
seen that are stamped "forged". the reason that Sugino cranks are measured 171mm is that it equals
6 3/4 inches (165mm =6 1/2) keeping in line with old British cottered spindles.
#52
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,039 Times
in
1,877 Posts
When Shimano introduced 600EX (a.k.a. Arabesque) mid-way though 1977, the older 600 remained in production. Then for the 1980 model year, Shimano changed their part number format. 600 became the 61xx series and 600EX became 62xx series. The FC-6100 crankset used a 3 arm spider and had been originally manufactured as the GC-100. It had been introduced for the 1976 model year and used a proprietary 95mm BCD wich accommodated 30T small chainrings, as 600 was orignally intended as a "road and touring" group.
There wasn't a FC-6100 5 arm crankset and the FC-6100 and FC-6200 cranksets were both introduced at the same time, simply being products carried over from the old part numbering system.
#53
Senior Member
Join Date: Oct 2017
Location: NJ
Posts: 627
Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 204 Times
in
142 Posts
I missed this the 1st time around, so thought I should post for posterity's sake.
When Shimano introduced 600EX (a.k.a. Arabesque) mid-way though 1977, the older 600 remained in production. Then for the 1980 model year, Shimano changed their part number format. 600 became the 61xx series and 600EX became 62xx series. The FC-6100 crankset used a 3 arm spider and had been originally manufactured as the GC-100. It had been introduced for the 1976 model year and used a proprietary 95mm BCD wich accommodated 30T small chainrings, as 600 was orignally intended as a "road and touring" group.
There wasn't a FC-6100 5 arm crankset and the FC-6100 and FC-6200 cranksets were both introduced at the same time, simply being products carried over from the old part numbering system.
When Shimano introduced 600EX (a.k.a. Arabesque) mid-way though 1977, the older 600 remained in production. Then for the 1980 model year, Shimano changed their part number format. 600 became the 61xx series and 600EX became 62xx series. The FC-6100 crankset used a 3 arm spider and had been originally manufactured as the GC-100. It had been introduced for the 1976 model year and used a proprietary 95mm BCD wich accommodated 30T small chainrings, as 600 was orignally intended as a "road and touring" group.
There wasn't a FC-6100 5 arm crankset and the FC-6100 and FC-6200 cranksets were both introduced at the same time, simply being products carried over from the old part numbering system.
In between the 3 arm and Arabesque is this 5 arm fc-6100. BTW some of the FC-6200 Arabesque were reportedly swaged. It was around this time Shimano was acquiring Takagi who produced earlier cranksets under contract.
https://velobase.com/ViewComponent.a...b-4f5ee74df3b8
__________________
Last new bike 1991
Last new bike 1991
Last edited by dmark; 03-25-22 at 09:22 PM.
#54
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,039 Times
in
1,877 Posts
Originally Posted by dmark;22450900...In between the 3 arm and Arabesque is this 5 arm fc-6100...
[url
[url
https://velobase.com/ViewComponent.aspx?ID=abf62a93-8b2d-42e0-a3eb-4f5ee74df3b8[/url]
I don't see how that could be an FC-6100 crankset, given that it has a December 1977 date code and Shimano was still using their old GC-XXX part numbering system at that time.
Thread
Thread Starter
Forum
Replies
Last Post
royale81
Bicycle Mechanics
9
02-25-16 11:20 PM
tanocupado
Classic & Vintage
20
11-21-15 02:56 PM
kidcopernicus
Bicycle Mechanics
10
06-23-15 11:54 AM
Fred Smedley
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
5
02-22-14 03:44 PM